Difference between revisions of "X5500"

From Geekworm Wiki
Jump to navigation Jump to search
Line 37: Line 37:
 
|-
 
|-
 
| SPECIFICATION ||
 
| SPECIFICATION ||
−
* <span style="color:red;">Power supply: 6-26Vdc，≥3A recommended</span>
+
* <span style="color:red;">Power supply: 6-26Vdc，≥3A recommended [[X830#Power Supply(Optional)]]</span>
 
* <span style="color:blue;">GPIO used : LRCK - IO19, BCK - IO18, DATA - IO21, IR - IO26, AMP mute - IO22</span>
 
* <span style="color:blue;">GPIO used : LRCK - IO19, BCK - IO18, DATA - IO21, IR - IO26, AMP mute - IO22</span>
 
* RCA Analog audio output level : 2V RMS
 
* RCA Analog audio output level : 2V RMS

Revision as of 17:15, 21 April 2020

Features

FOR USE WITH Raspberry Pi 1 Model B+/ 2 Model B / 3 Model B / 3 Model B+ / 4 Model B
OS
  • Moode Audio Player
  • OSMC
  • Openelec
  • Raspbian Jessie
  • Volumio
  • Pi Core Player
KEY FEATURES
  • Full-HD audio – up to 24-bit/192kHz playback
  • Audiophile ESS Technology Sabre premier stereo DAC ES9023
  • ES9023 delivers jitter-free studio quality audio with 112dB DNR
  • Built in High quality Class-D stereo audio amplifiers (TI TPA3118D2)
  • Up to 2×30W Into a 8-Ω BTL Load at 24Vdc
  • Capable of driving 4 Ohm speakers (also works with higher impedance speakers)
  • Uses the Texas Instruments ultra-low-noise voltage regulator (output noise< 10μVRMS)
  • Uses the Texas Instruments high efficiency step-Down DC converter (up to 95%)
  • 6V~26Vdc converted to 5.1V, 3A to power the Raspberry Pi
  • Uses the genuine ALPS RK163 series potentiometer for smooth volume adjustment
  • High quality digital amplifier inductors
  • Onboard pluggable speaker screw terminals
  • Onboard XH2.54 connector providing 5V output to power other devices
  • Optimal design realizes middle -high quality sound and low distortion
  • Uses the digital I2S audio signals to reduce CPU load over USB audio solutions
  • Powers the Raspberry Pi - no additional power supply
  • Reserved Raspberry Pi GPIO 40-pin header
  • Pop-noise can be improved by enabling GPIO control
  • AMP can be enabled / disabled with jumper link
  • Compatible with X710 for intelligent power mgmt and cooling your amplifier [1]
  • Compatible with X857/X856/X855 for mSATA SSD storage board, compatible with X872 for M.2 NVME SSD board, compatible with X862 for M.2 SATA SSD board [2]
SPECIFICATION
  • Power supply: 6-26Vdc，≥3A recommended X830#Power Supply(Optional)
  • GPIO used : LRCK - IO19, BCK - IO18, DATA - IO21, IR - IO26, AMP mute - IO22
  • RCA Analog audio output level : 2V RMS
  • Amplifier max output power: 2×30W at 4Ω BTL Load at 24Vdc
  • Resolution/Sampling Rate: upto 24bit / 192KHz (Raspberry Pi I2S)
  • PCB size 85 x 57mm
NOTES
  1. ↑ Additional M2.5*21 M/F spacers & 2-pin XH2.54 cable required (not supplied)
  2. ↑ Additional M2.5*8 M/F spacers required (not supplied)

Don't power your Raspberry Pi via the Pi's 40-pin header and Type-C or Micro USB socket at the same time

Packing List

  • X5500 Expansion Board x 1
  • Screw M2.5 *6mm x 8
  • Spacer F/F M2.5 *20mm x 4

Document

Software Configuration: X450/X5500_Software_Configuration

FAQ

Add your comment
Geekworm Wiki welcomes all comments. If you do not want to be anonymous, register or log in. It is free.


Retrieved from "https://wiki.geekworm.com/index.php?title=X5500&oldid=9738"