Comments log

Jump to navigation Jump to search

This is a log of comments.

Logs
(newest | oldest) View ( | ) (20 | 50 | 100 | 250 | 500)
  • 15:53, 11 April 2024 212.199.107.138 talk posted a new comment on X832 (what is the reason it is not compatible with the pi 5? is there any way to mod it so it would be compatible with the pi 5?)
  • 12:32, 11 April 2024 Lisa talk contribs posted a new comment on X1200 (Hi, X1200 is out of stock and is still in production.)
  • 12:30, 11 April 2024 Lisa talk contribs posted a new comment on X832 (Hi, X832 NOT compatible with Pi 5; please refer to X1008 or X1009)
  • 10:29, 11 April 2024 210.21.71.102 talk posted a new comment on X1200 (where to buy?)
  • 19:26, 10 April 2024 212.199.107.138 talk posted a new comment on X832 (is it compatible with pi 5?)
  • 20:05, 8 April 2024 88.217.180.116 talk posted a new comment on C779 (What is the difference between X630 C779 and C790?)
  • 16:17, 8 April 2024 Lisa talk contribs posted a new comment on X1202 (Hi，When the load is heavy and the USB-C power supply is insufficient, the UPS will draw power from the battery. But if the USB-C power supply does not have overcurrent protection, it may be damaged. It is recommended to use 5V 5A power supply.)
  • 15:22, 8 April 2024 Lisa talk contribs posted a new comment on PiKVM-A3 (Hi,You can refer to the installation video above)
  • 15:04, 8 April 2024 Lisa talk contribs posted a new comment on X306 (X306 does not have this function setting.)
  • 14:56, 8 April 2024 Lisa talk contribs posted a new comment on P173 (Hi,Yes, the square copper plate is used for CPU instead of the blue thermal pad, and silicone grease is applied on both sides; please refer to the installation video above - 1 minute 36 seconds)
  • 21:35, 7 April 2024 46.132.186.67 talk posted a new comment on X715 Software (Pine64 support (Rock64/Rock64Pro)?)
  • 19:10, 7 April 2024 94.251.227.233 talk posted a new comment on PiKVM-A3 (Like there are 2 connections ? First to motherboard second to PANEL ? I somehow know what is motherboard but what is a panel ?)
  • 19:09, 7 April 2024 94.251.227.233 talk posted a new comment on PiKVM-A3 (YO anybody can help me with x630-A5 ? I am completely ignorant when it comes to hardware ? Would love somebody to explain me what should i do)
  • 02:06, 5 April 2024 37.201.195.203 talk posted a new comment on X1202 (What happens, if I connect a USB C power supply that does not provide 5V 5A but for example 5V 3A. Will the UPS use the batteries to make up for the missing power? Is it possible to charge the UPS with 5V 3A when the PI is turned off? Thank you)
  • 00:36, 5 April 2024 78.193.210.122 talk posted a new comment on X306 (Is there a gpio pin that tells the raspberry if ups working on battery or power line (as in the x728 hat)?)
  • 16:35, 4 April 2024 86.26.156.109 talk posted a new comment on P173 (Please explain how to use the square copper plate (it is not shown in the above images)? I imagine it fits onto the silver cpu with thermal grease on both sides. However, do we still use the blue thermal pad or not and if we do which side of the copper does the thermal pad go?)
  • 15:09, 3 April 2024 Lisa talk contribs posted a new comment on X1202 (Hi,The usual 18650 batteries can be used, but please use high quality batteries.)
  • 14:56, 3 April 2024 Lisa talk contribs posted a new comment on X1003 (Hello，@Anonymous user #17 ；please refer to NVMe SSD boot with the Raspberry Pi 5#FAQ and Try the following test it： 1/Run the lspci andlsblk command to check the NVMe SSD is recognized. 2/Add PCIE_PROBE=1 to the eeprom, (Run sudo rpi-eeprom-config --edit command, then add this line, then press CTRL+O to write change to file, press CTRL+X to exit, then reboot) 3/Update the bootloader firmware to the last verson, refer to How to update eeprom firmware, this is very important!!!And finally b...)
  • 14:44, 3 April 2024 Lisa talk contribs posted a new comment on X1001 (Hello,Partition and format the new ssd, you can find more information on Google.)
  • 14:35, 3 April 2024 Lisa talk contribs posted a new comment on P580 (Hi,We have sent X1001 to the Amazon warehouse, but it may take some time for the warehouse to receive it. If you want to buy the X1002+P580; you can purchase this kit here.https://www.aliexpress.com/item/3256806322304169.html)
  • 12:21, 3 April 2024 Harry talk contribs posted a new comment on X735 Software (<span class="tb_red"><big>This tutorial is deprecated, see X735-script</big></span>)
  • 12:09, 3 April 2024 Harry talk contribs posted a new comment on X1200 (Simple control of charging via GPIO16: <pre>pinctrl set 16 op dh</pre> - stops charging <pre>pinctrl set 16 op dl</pre> - starts charging default is charging mode)
  • 12:07, 3 April 2024 Lisa talk contribs posted a new comment on LVDS Adapter (not support I2S signals input)
  • 12:04, 3 April 2024 Lisa talk contribs posted a new comment on NASPi Gemini 2.5 (Hello,Answered your question hereXScript)
  • 21:53, 2 April 2024 185.65.135.156 talk posted a new comment on P580 (Been trying to buy the P580 and X1002 on Amazon. There is none of them in Amazon Sweden. Could instead buy the P579 (available on Amazon Sweden) but X1001 is not available.)
  • 01:57, 2 April 2024 99.64.244.60 talk posted a new comment on X1001 (Im installing a x1001 with a samsung ssd 980. Can you point me to instructions for partitioning & formatting on the x1001? Or should I mount it on USB and try to partition/format there?)
  • 01:50, 2 April 2024 171.60.170.59 talk posted a new comment on XScript (Create an alias yourself by running these two commands: echo "alias xoff='sudo /usr/local/bin/xSoft.sh 0 27'" >> ~/.bashrc source ~/.bashrc)
  • 01:30, 2 April 2024 192.150.10.203 talk posted a new comment on NVMe SSD boot with the Raspberry Pi 5 (Bought X1002 & WD Green SN350 2TB Works just fine without any configuration. The only configuration change to enable PCI_gen3: # PCIe Gen3 dtparam=pciex1_gen=3 within: sudo nano /boot/firmware/config.txt # PCIe Gen3 dtparam=pciex1_gen=3 $ sudo lspci 0000:00:00.0 PCI bridge: Broadcom Inc. and subsidiaries Device 2712 (rev 21) 0000:01:00.0 Non-Volatile memory controller: Sandisk Corp WD PC SN540 / Green SN350 NVMe SSD 1 TB (DRAM-less) 0001:00:00.0 PCI bridge: Broadcom Inc. and subsidia...)
  • 00:42, 2 April 2024 192.77.184.26 talk posted a new comment on X1202 (Manual says "Note: the voltage range must be 3.00~4.10vdc." 18650's can go down to 2.5V per cell. Can the minimum be 2.5-2.7V or is 3.0V min a hardware limitation?)
  • 09:59, 1 April 2024 Harry talk contribs posted a new comment on X882 (Need more detail)
  • 09:57, 1 April 2024 103.192.225.113 talk posted a new comment on X882 (Can't power X882 from pi 4.)
  • 02:33, 1 April 2024 62.4.45.252 talk posted a new comment on X735-script (I have the same problem Traceback (most recent call last): File "/home/pi/x735-script/read_fan_speed.py", line 29, in <module> GPIO.add_event_detect(TACH, GPIO.FALLING, fell) RuntimeError: Failed to add edge detection)
  • 00:55, 1 April 2024 147.12.237.78 talk posted a new comment on X735-script (me too, need help)
  • 00:54, 1 April 2024 147.12.237.78 talk posted a new comment on X735 Software (I cant get it working on umbrelOS 1.0 for Raspberry Pi4 Please help)
  • 21:34, 31 March 2024 91.165.240.102 talk posted a new comment on X1003 (Hi, I confirm that Transcend PCIe SSD Gen3 x4 with MTE400S controller (I have with the 256Gb version), didnt't work. First of all, you have to push dtparam=pciex1_gen=3 in the config.txt configuration file. All other value (as dtparam=pciex1 or dtparam=pciex1_gen=2) can works, but with a very slow boot, a very slow login, and all commands are also very slow (it can takes several minutes !). In second hand, if you can boot and play with your RPi5, I always experienced an I/O error with this...)
  • 15:10, 30 March 2024 87.123.246.243 talk posted a new comment on 2.8 inch Touch Screen for Pi zero (Any chance, we can get support to make the MZDPI-display work with bookworm on a Pi Zero? -Thanks in advance!)
  • 14:18, 30 March 2024 24.108.66.145 talk posted a new comment on LVDS2 (I have a atgames legends ultimate. I can not get this to work . I only get flashing d1. I have tried checking the line sequence. HELP) Tags: Mobile web edit, Mobile edit
  • 13:05, 30 March 2024 47.229.60.33 talk posted a new comment on X1201 (Can the ups be powered by a power bank, while using the raspberry pi 5? Will it have any negative impact on performance as well?) Tags: Mobile web edit, Mobile edit
  • 20:19, 29 March 2024 160.86.98.146 talk posted a new comment on LVDS Adapter (I want to input I2S signals.)
  • 10:55, 29 March 2024 27.131.134.23 talk posted a new comment on X1200 (Yes, that will work temporarily, but you should likely be using 'pinctrl set 16 pu' to stop charging and 'pinctrl set 16 pd' to start charging.)
  • 09:10, 29 March 2024 167.60.109.45 talk posted a new comment on NASPi Gemini 2.5 (I'm having problems with the "xoff" command not working to shut down my computer. Could anyone solve it after updating the kernel?)
  • 21:33, 28 March 2024 212.154.53.198 talk posted a new comment on XScript (I have installed retropi to my pi4. Run sudo update and sudo upgrade first and then installed xscript. Fan controll works but xoff command doesnt work. Says command not found. Rebooted multiple times. I have to force close with power button. What can i do?)
  • 14:01, 28 March 2024 75.176.7.223 talk posted a new comment on X1200 (For anyone else looking for the method to control the charging: "pinctrl set 16 op dl" will ENABLE charging the 18650 cells. "pinctrl set 16 op dh" will DISABLE charging the 18650 cells.)
  • 13:57, 28 March 2024 24.32.12.59 talk posted a new comment on M400 (FFC Cables Blue Side faces the Brown Connectors. The Leads are on the Beige Side. So it will be Blue Side Faces Brown and White Facing Beige.)
  • 12:05, 28 March 2024 Lisa talk contribs deleted comment #4576 on X1003
  • 12:05, 28 March 2024 Lisa talk contribs posted a new comment on X1003 (Hi,Thanks for your feedback.We have contacted you via this email[m0gwai@arcor.de])
  • 12:03, 28 March 2024 Lisa talk contribs posted a new comment on X1200 (Hello,please refer toX1200 Hardware---Raspberry Pi GPIO used)
  • 11:45, 28 March 2024 Lisa talk contribs posted a new comment on P165 (Hi,thanks for your feedback.Are both fans failing? could you please let us know Where did you buy it and the order NO.? our email[support@geekworm.com])
  • 11:25, 28 March 2024 Lisa talk contribs posted a new comment on P165 (Hello,We will consider upgrading P165 to support Pi5. Now we have a pure copper heatsink,please refer to H502;)
  • 12:09, 27 March 2024 98.97.83.55 talk posted a new comment on P165 (I have purchased two of the P165-A's for my RPi4B's they worked perfectly for about three weeks, then the bearings on the fan failed and the fans make loud shriek/whine noises and turn much slower. :-( I hope you plan on finding a better component vendor for future versions.)
  • 12:06, 27 March 2024 167.56.84.197 talk posted a new comment on NASPi (The "xoff" command has stopped working from the terminal. Any solution?)
  • 05:55, 27 March 2024 64.89.255.201 talk posted a new comment on X306 (I see a lot of people knocking this board, i just want to say it's working great for me, I put virtual here server on a pi zero WH and it works amazingly. I can take my portable usb hub out to the garage and plug my laser cutter into it, then go back to my office and burn for a couple hours only using half battery or so. I didn't do anything special.)
  • 02:52, 27 March 2024 75.176.7.223 talk posted a new comment on X1200 (It mentions above that "Battery charging control can be managed via GPIO". I cannot find any information on how to do this, does anyone have information about this? It would be nice if I could stop charging the cells at a configurable percentage.)
  • 04:29, 26 March 2024 95.223.226.235 talk posted a new comment on X1003 (the config of the pcie controler might be bad, as I can read there: [ 1.692983] brcm-pcie 1000110000.pcie: host bridge /axi/pcie@110000 ranges: [ 1.700455] brcm-pcie 1000110000.pcie: No bus range found for /axi/pcie@110000, using [bus 00-ff] [ 1.710004] brcm-pcie 1000110000.pcie: MEM 0x1b00000000..0x1bfffffffb -> 0x0000000000 [ 1.718762] brcm-pcie 1000110000.pcie: MEM 0x1800000000..0x1affffffff -> 0x0400000000 [ 1.727519] brcm-pcie 1000110000.pcie: IB MEM 0x0000...)
  • 04:09, 26 March 2024 95.223.226.235 talk posted a new comment on X1003 (I bought the pi5 with a pimoroni base board, and a samsung 980 Pro 1 TB and it does NOT work! I found out that it musst be the pimoroni board, I tried out the Nvme ssd works on my pc without, and there it works. I read at the logs,that the boad tried to log on st the pie, but then it does not. m0gwai@liquid-server:~ $ lspci 00:00.0 PCI bridge: Broadcom Inc. and subsidiaries BCM2712 PCIe Bridge (rev 21) 01:00.0 Ethernet controller: Raspberry Pi Ltd RP1 PCIe 2.0 South Bridge m0gwai@liquid-se...)
  • 00:36, 26 March 2024 Harry talk contribs posted a new comment on X735-script (Refer to https://github.com/geekworm-com/x729-script/blob/main/sample/plsd-gpiod.py Please use ```libgpiod``` library and don't use RPi.GPIO anymore. https://github.com/raspberrypi/linux/issues/6037)
  • 00:34, 26 March 2024 Harry talk contribs deleted comment #4560 on X735-script
  • 00:34, 26 March 2024 Harry talk contribs deleted comment #4559 on X735-script
  • 18:54, 25 March 2024 Lisa talk contribs posted a new comment on X650 (yes.)
  • 17:36, 25 March 2024 Lisa talk contribs posted a new comment on X1200 (There is no need to do this as the Pi5 can be powered via the pogo pins.)
  • 17:34, 25 March 2024 Lisa talk contribs posted a new comment on X1200 (Not support Pi4, because it power Pi5 via [pogo pin], you can use X-UPS1 or X703)
  • 17:14, 25 March 2024 Lisa talk contribs posted a new comment on X1001 (Please try to remove [dtparam=pciex1_gen=3])
  • 17:05, 25 March 2024 Lisa talk contribs posted a new comment on X-C1 Software (The script is not tested VMware ESXI ARM operating system. To make the 3pin PWM cooling fan running, please remove/pull out the yellow cable if you use X-C1 V1.3 version. Remove the jumper cap on "Fan FS" PIN of X-C1 V2.0 to let the fan running at full speed.)
  • 17:00, 25 March 2024 Lisa talk contribs posted a new comment on C790 (the same with Raspberry Pi4)
  • 16:59, 25 March 2024 Lisa talk contribs deleted comment #4568 on C790
  • 16:56, 25 March 2024 Lisa talk contribs posted a new comment on C790 (The same with Pi4)
  • 16:43, 25 March 2024 Lisa talk contribs posted a new comment on X1000 (It's for V1.3 version PCIe indicator light. but latest version V1.5 has been cancelled it.)
  • 16:37, 25 March 2024 Lisa talk contribs deleted comment #4566 on X1000
  • 16:37, 25 March 2024 Lisa talk contribs posted a new comment on X1000 (it is X1000 V1.3 version PCIe indicator light. The latest version V1.5 has been cancelled.)
  • 16:29, 25 March 2024 Lisa talk contribs posted a new comment on LVDS Adapter (Hello, Could you provide more detailed information? not working ---is the screen doesn't light up? No signal output?)
  • 16:02, 25 March 2024 Lisa talk contribs posted a new comment on X857 V2.0 (Hi，it is V2.0 version,Not support TRIM)
  • 15:56, 25 March 2024 Lisa talk contribs posted a new comment on X715 (Hello,The X728 can support the X715. Mount the X728 on top of the X715；need a 2*20 Pin Female Header to increase the height, and need spacers of the appropriate height to hold the X715 in place.)
  • 14:47, 25 March 2024 Harry talk contribs posted a new comment on XScript (You upgraded the OS and the kernel was updated in the new OS. Please re-download & reinstall the script)
  • 14:46, 25 March 2024 Harry talk contribs posted a new comment on XScript (Your system is missing the source command. You can reboot your device to make bashrc take effect)
  • 22:27, 23 March 2024 Harry talk contribs posted a new comment on X735-script ('''/home/pi/x735-v2.5/''' should is '''/home/pi/x735-script/''' Please use the last install script)
  • 22:22, 23 March 2024 Harry talk contribs posted a new comment on X735-script (must update the kernel to 6.6.22 sudo rpi-update Refer to https://github.com/geekworm-com/x-c1/issues/11)
  • 18:21, 23 March 2024 108.25.83.239 talk posted a new comment on LVDS2 (does this support output to a lcd that has 1366 x 768 resolution?)
  • 05:53, 23 March 2024 166.196.89.45 talk posted a new comment on X1200 (Hi. Can this board be used for the Raspberry pi 4? I cannot use the 40 pin header as your 4 board does.) Tags: Mobile web edit, Mobile edit
  • 02:16, 23 March 2024 169.155.242.90 talk posted a new comment on X1001 (i have installed a x1001 and Transcend 128 Go PCIe™ Gen3 x4 TS128GMTE110S when i run bench i have good stats like 300 (and 800 in gen3) but everything else is slower and wifi is super slow any way to fix that ?)
  • 01:41, 23 March 2024 213.149.50.112 talk posted a new comment on XScript (It works. Thank you.)
  • 23:29, 22 March 2024 185.255.129.92 talk posted a new comment on X735-script (I have the same Problem! At the beginning was all fine, but now i have to run the fan at full speed without the jumper! I have done all the installation processes again and the shutdown "x735off" still works but the auto-fan-speed doesn't. The x735-fan.sh script is already in use and under htop visible!)
  • 21:52, 22 March 2024 159.196.214.64 talk posted a new comment on X650 (Do we have to use the "V3 Pre-Assembled" image or the "V3 Hat Kit" image?)
  • 19:01, 22 March 2024 Harry talk contribs posted a new comment on XScript (reinstall script.)
  • 18:34, 22 March 2024 Lisa talk contribs posted a new comment on X735 Hardware (Hi, it's for input power； X735 support 4 kinds of power supply: ①DC5525 port: Can provide up to 4A power supply capability. ②Type C power port: specially designed for Raspberry Pi 4 Model B ③Micro USB; Compatible with your original mirco usb power adapter ④XH2.54 2Pin Cable: This is a flexible power supply)
  • 18:33, 22 March 2024 Lisa talk contribs deleted comment #4550 on X735 Hardware
  • 18:33, 22 March 2024 Lisa talk contribs posted a new comment on X735 Hardware (Hi, it's for input power； X735 support 4 kinds of power supply: ①DC5525 port: Can provide up to 4A power supply capability. ②Type C power port: specially designed for Raspberry Pi 4 Model B ③Micro USB; Compatible with your original mirco usb power adapter ④XH2.54 2Pin Cable: This is a flexible power supply)
  • 18:29, 22 March 2024 Lisa talk contribs posted a new comment on X1011 (Hello,The X1011 has just gone on sale and there are no plans to produce the case yet.)
  • 18:27, 22 March 2024 Harry talk contribs deleted comment #3884 on X306
  • 18:27, 22 March 2024 Harry talk contribs deleted comment #3878 on X306
  • 18:27, 22 March 2024 Harry talk contribs deleted comment #3852 on X306
  • 18:27, 22 March 2024 Harry talk contribs deleted comment #3857 on X306
  • 18:27, 22 March 2024 Harry talk contribs deleted comment #3821 on X306
  • 18:26, 22 March 2024 Harry talk contribs deleted comment #3868 on X306
  • 18:21, 22 March 2024 Lisa talk contribs posted a new comment on X728-hardware (Hello,The X728 can support the X715. Mount the X728 on top of the X715；need a 2*20 Pin Female Header to increase the height, and need spacers of the appropriate height to hold the X715 in place. We do not recommend this and suggest you consider the X729 if you want to use a UPS that supports wide voltage inputs.)
  • 17:56, 22 March 2024 Lisa talk contribs deleted comment #4546 on X728-hardware
  • 17:55, 22 March 2024 Lisa talk contribs posted a new comment on X728 (Hi,We tested that X728 is compatible with Pi5，please refer to X728-script)
  • 17:51, 22 March 2024 Lisa talk contribs posted a new comment on X728-hardware (Hi,X728 not support X715)
  • 20:11, 21 March 2024 147.161.228.175 talk posted a new comment on X306 (Easy solution, that Geekworm support does not know.... in config.txt comment out: dtoverlay=dwc2 and in cmdline.txt remove: modules-load=dwc2,g_ether reboot and it works!)
  • 02:51, 21 March 2024 73.18.184.40 talk posted a new comment on X1011 (Any plans for a case for this hat ?)
  • 21:50, 20 March 2024 64.39.208.241 talk posted a new comment on X735 Hardware (On X735 v3.0 is the Type-C DC 5V connector for input power or output power? If output power, how much current can it source?)
  • 18:56, 20 March 2024 Lisa talk contribs posted a new comment on PiKVM-A3 (Yes, you can remove the fan and replace it with a P165 Heatsink, but you need to prepare copper spacers of appropriate height to fix it.)
  • 18:47, 20 March 2024 Lisa talk contribs posted a new comment on PiKVM-A3 (Sorry, we cannot be sure yet. Please follow our wiki and Geekworm official store for updates.)
  • 18:43, 20 March 2024 Lisa talk contribs posted a new comment on PiKVM-A3 (we don't have longer USB cables yet.Thanks very much for your feedback.)
  • 08:20, 20 March 2024 73.94.245.209 talk posted a new comment on XScript (Your "fix" for kernel 6.6 does not work. ~ $ cd xscript rm x-c1-softsd.sh x-c1-pwr.sh -f git pull origin chmod +x *.sh sudo cp -f . /x-c1-softsd.sh /usr/local/bin/ sudo cp -f . /x-c1-pwr.sh /usr/local/bin/ sudo reboot Already up to date. cp: -r not specified; omitting directory '.' cp: cannot stat '/x-c1-softsd.sh': No such file or directory cp: -r not specified; omitting directory '.' cp: cannot stat '/x-c1-pwr.sh': No such file or directory Broadcast message from root@mediabed on pts/1...)
  • 17:57, 19 March 2024 207.188.130.160 talk posted a new comment on X1003 (Anyone knows if Foresee E2M2 064G (SteamDeck original ssd nvme 2230) works with this model? thanks)
  • 14:23, 19 March 2024 67.167.95.152 talk posted a new comment on NVMe SSD boot with the Raspberry Pi 5 (What is a good boot time booting from NVMe?)
  • 11:16, 17 March 2024 184.147.47.100 talk posted a new comment on X1004 (Hi. The description says "PCIe 2.0 interface" but the features list says "Provides speedy data transfer with PCIe 2.0 5Gbps / PCIe 3.0 8Gbps". Does it support Gen 3 speeds or not?) Tags: Mobile web edit, Mobile edit
  • 22:05, 16 March 2024 142.126.95.42 talk posted a new comment on X1001 (I tried the Geekworm x1001 with a Fanxiang S660 500gb Nvme. While I was able to get it to boot a few times with Raspberry Pi OS and also Recalbox, I have not been able to get it to boot successfully since with anything I've tried. I currently would not recommend this combination.)
  • 02:59, 16 March 2024 37.201.154.23 talk posted a new comment on X-C1 Software (howto on esxi fling raspberry? does the script work on it?)
  • 20:30, 15 March 2024 68.50.113.137 talk posted a new comment on X1000 (What are the unmarked, unpopulated pin-holes next to the PCIe FFC connector?)
  • 15:27, 15 March 2024 86.49.235.161 talk posted a new comment on C790 (What is Raspberry Pi 5 maximum 1080p fps? Does RPI 5 utilize 4 lan like CM4?)
  • 13:50, 15 March 2024 58.208.50.167 talk posted a new comment on M901 (have a good day)
  • 03:43, 15 March 2024 84.132.182.86 talk posted a new comment on X735-script (Hello Support under RPI OS Linux 6.6.20+rpt-rpi-v8 #1 SMP PREEMPT Debian 1:6.6.20-1+rpt1 (2024-03-07) aarch64 GNU/Linux I get now these Error File "/home/pi/x735-v2.5/./read_fan_speed_once.py", line 29, in <module> GPIO.add_event_detect(TACH, GPIO.FALLING, fell) RuntimeError: Failed to add edge detection How can I solve this?)
  • 00:17, 15 March 2024 5.44.173.95 talk posted a new comment on LVDS Adapter (I have V1.5 board and it's not working. I've checked, and the supply voltage from U1 is 1,2V, is this correct? Voltage from U2 is correct 3,3V.)
  • 04:45, 14 March 2024 176.38.170.162 talk posted a new comment on How to update eeprom firmware (After RPI imager wrote Ubuntu to 1TB SSD, X1001 hat(New version) is not responding anymore. SDD is working fine with other hat.)
  • 03:38, 14 March 2024 142.134.94.40 talk posted a new comment on P579 (I bought the P579. I already owned the x1001 and the Pi5 had the active cooler. This is a great combination case which I highly recommend.) Tags: Mobile web edit, Mobile edit
  • 18:16, 13 March 2024 78.94.224.220 talk posted a new comment on X882 (Hello i planned using two Samsung 970 EVO SSDs are thoose not recommended? What were your issues with thoose SSDs? Thank you in advance!)
  • 05:58, 13 March 2024 82.64.113.192 talk posted a new comment on NVMe SSD boot with the Raspberry Pi 5 (spend whole day on the same issue. having Crucial P3 Plus 500GB ssd : Model Number: CT500P3PSSD8 Firmware Version: P9CR411 thank you man for sharing, you saved my live :))
  • 22:11, 12 March 2024 213.167.121.42 talk posted a new comment on X1202 (I've got the same issue. I'm using the official RPI 27W power supply through usb-c)
  • 19:59, 12 March 2024 50.4.166.201 talk posted a new comment on X728-hardware (Hello, is the X728 compatible with the X715? How are they connected? Do they need an external power cable between them? Would you share a block diagram or schematic to verify that there are no issues between these boards? Thank you)
  • 03:50, 12 March 2024 50.4.166.201 talk posted a new comment on X715 (Would you give more details on how to use an X715 with an X728? What versions of the boards are compatible? Thank you)
  • 00:23, 12 March 2024 213.240.178.238 talk posted a new comment on X857 V2.0 (Is TRIM available in year 2024?)
  • 16:30, 11 March 2024 83.38.21.114 talk posted a new comment on XScript (Hello, I install XScript on a "Linux raspberid64 6.6.17-v8+ #1734 SMP PREEMPT Mon Feb 19 11:59:52 GMT 2024 aarch64" but the "x-c1-pwr.sh" doesn't work properly: $ sudo /usr/local/bin/x-c1-pwr.sh /usr/local/bin/x-c1-pwr.sh: line 6: echo: write error: Invalid argument /usr/local/bin/x-c1-pwr.sh: line 7: /sys/class/gpio/gpio4/direction: No such file or directory /usr/local/bin/x-c1-pwr.sh: line 9: echo: write error: Invalid argument /usr/local/bin/x-c1-pwr.sh: line 10: /sys/clas...)
  • 13:13, 11 March 2024 27.116.208.36 talk posted a new comment on PiKVM-A3 (Fellow customer here. The Raspberry Pi 4 11mm embedded heatsink (P165-B) is compatible with the KVM-A3 Kit using four 2.5x9+6 standoffs instead of the 2.5x20 standoffs included in the KVM-A3 Kit. The fan doesn't get in the way and everything fits perfectly. You can probably remove the fan entirely with the heatsink installed, but I haven't personally tried.) Tags: Mobile web edit, Mobile edit
  • 13:10, 11 March 2024 27.116.208.36 talk posted a new comment on P165 (@geekworm please comment) Tags: Mobile web edit, Mobile edit
  • 09:27, 11 March 2024 104.28.55.18 talk posted a new comment on X1001 (and of course I get an SSD that is specifically on the incapable list. Whoops.)
  • 08:38, 11 March 2024 173.53.65.5 talk posted a new comment on X1003 (You people are interesting GeekWorms. It would add .05 to 10 cents to add the ability to put the small nvme screw into eithe the 2242 or 2230 holes on the x 1003 device. Why not place the glued in washer in both holes. Just a thought since these tiny washers are hard to locate. Just saying!)
  • 01:18, 11 March 2024 68.202.27.10 talk posted a new comment on PiKVM-A8 (I would also like to be able to control the fan. It is currently louder than the PC being controlled.)
  • 00:58, 11 March 2024 130.180.66.238 talk posted a new comment on PiKVM-A3 (I also find the current fan terribly loud :( Is there also a suitable one that can be installed relatively easily and is very quiet? Best regards)
  • 00:57, 11 March 2024 130.180.66.238 talk posted a new comment on PiKVM-A3 (That would be great :))
  • 00:56, 11 March 2024 130.180.66.238 talk posted a new comment on PiKVM-A3 (Pi KVM is really great, what I wonder if you can completely remove the fan or if that causes problems? Can you use a passive cooler as an alternative? Or at least make the fan quieter?)
  • 00:54, 11 March 2024 130.180.66.238 talk posted a new comment on PiKVM-A3 (I am also very interested in a version for the Raspberry Pi 5, as I would not like to buy the version for the Pi 4 now, which will soon no longer be up to date. Can you say approximately when a new version will be available for the Raspberry Pi 5?)
  • 00:52, 11 March 2024 130.180.66.238 talk posted a new comment on PiKVM-A3 (I would also like to have longer USB cables included with the kit or as an add on in the store at Geekworm/Amazon. Especially as it is a special USB cable. I would also like the bundle to be 3-4€ more expensive if it would include 2 lengths of KVM USB cable. A medium one like now and a long one. The same with the ATX Ethernet cable, that would be really great and I think that these are very reasonably priced items. It would be a great service and would make the set even better :))
  • 19:55, 7 March 2024 113.36.104.9 talk posted a new comment on XScript (I installed XScript on Raspberry Pi OS, but excute source ~/.bashrc display -sh: 1: source: not found xoff command don't work but sudo /usr/local/bin/x-c1-softsd.sh works fine. Perhaps "source ~/.bashrc" error caouse the phenomenon. Can I solve this error?)
  • 17:04, 7 March 2024 Lisa talk contribs posted a new comment on X829-C1 (Hello, you can buy it（6010 Fan-2pin XH2.54） from: https://geekworm.com/ If you need to ship to Europe, please email to us[support@geekworm.com])
  • 15:56, 7 March 2024 103.192.227.240 talk posted a new comment on X1202 (Hi,We have tested X1201 and there is no problem. Could you please provide more detailed information? send some pictures or videos to us, support@geekworm.com)
  • 15:53, 7 March 2024 103.192.227.240 talk posted a new comment on X728 (Hi,It is normal. The algorithm for reading the power is very complicated. You can try draining the battery, then fully charging it, and then try reading the battery level again.)
  • 14:49, 7 March 2024 80.174.63.100 talk posted a new comment on X829-C1 (Is it possible to purchase the cooler separately ?)
  • 12:03, 6 March 2024 66.191.29.250 talk posted a new comment on P579 (That was my first observation. It went down to 53%. I don't know what it was before there was no issue.)
  • 09:34, 6 March 2024 146.70.166.159 talk posted a new comment on NVMe SSD boot with the Raspberry Pi 5 (Just bought an x1001 and paired it with a 1T Samsung 980 Pro. Installed with no problems other than having to reposition the PCIe cable once. Love the performance!)
  • 01:39, 6 March 2024 86.171.117.117 talk posted a new comment on X1001 (I am one very happy customer with the X1001. Like the way it provides just enough clearance for the CPU fan. I would recomend fitting a heatsink to the SSD. Amazon "ELUTENG M.2 SSD NVME Heatsink 2280" is recomended, it fully encases the SSD keeping it nice and cool. Fits on the X1001 perfectly)
  • 01:34, 6 March 2024 86.171.117.117 talk posted a new comment on X1001 (I have the same hardware X1001 and a Crucial P3, which works perfectlty. Most likely reason for problem, you must format the SSD (EXT4) before installing on the X1001 in the PI.)
  • 00:35, 6 March 2024 173.239.224.146 talk posted a new comment on X1202 (After using the USB C port on the x1202 I heard the board making small ticking noises. After I pulled the plug the entire unit lost power. Is the USB C port not the preferred port?)
  • 21:30, 5 March 2024 93.42.109.113 talk posted a new comment on X728 (My % of charge is above 100, like 104...it is normal?)
  • 16:04, 5 March 2024 Harry talk contribs posted a new comment on X1201 (Nothing will happen, but it won't charge)
  • 15:58, 5 March 2024 Lisa talk contribs posted a new comment on NASPi Gemini 2.5 (Hello,Under normal circumstances, its power supply needs can be met. If it doesn't work, you can try changing the power supply and test it.)
  • 15:54, 5 March 2024 Lisa talk contribs posted a new comment on LVDS Adapter (Hello，Our test can support 1024x600 resolution, but because there are too many screen models, we cannot guarantee compatibility with all screens.)
  • 15:33, 5 March 2024 Lisa talk contribs posted a new comment on X1202 (NOT support.)
  • 14:58, 5 March 2024 Lisa talk contribs posted a new comment on X1003 (Hi,You can run "lspci" command to check the controller brand of the SSD, Not compatible with Phison controller. If the SSD is not recognized, please follow these steps to troubleshoot the problem NVMe SSD boot with the Raspberry Pi 5#FAQ Or contact us at email: support@geekworm.com)
  • 14:56, 5 March 2024 Lisa talk contribs posted a new comment on X1003 (Hi,You can check the SSD controller through lspci, Not compatible with Phison controller. If the SSD is not recognized, please follow these steps to troubleshoot the problemNVMe SSD boot with the Raspberry Pi 5#FAQ Or contact us at email: support@geekworm.com)
  • 14:51, 5 March 2024 Lisa talk contribs posted a new comment on X1003 (Hi,It's hard to see what's wrong here. Please send screenshot via email[support@geekworm.com]. And tell us your order number. Thanks)
  • 11:29, 5 March 2024 Lisa talk contribs posted a new comment on P579 (Hi,We also considered this issue when designing P579/P580 Case, but it is difficult to implement. If you have any good switch ideas, please recommend them to us.Thanks)
  • 09:54, 5 March 2024 109.111.162.185 talk posted a new comment on LVDS Adapter (Helo. I've bought v1.5 board and trying to connect it to convert LVDS signal from AC8257 SOC to HDMI but nothing works. 1.Edid on HDMI receiver is necessary or not? 2. I have 1024x600 resolution is it supported?)
  • 04:50, 5 March 2024 192.77.184.26 talk posted a new comment on X1202 (Can this board tolerate being powered on DC jack AND USB-C simultaneously?)
  • 19:32, 4 March 2024 103.193.138.118 talk posted a new comment on X1201 (@Harry Yes but what if someone ACCIDENTALLY uses the wrong port? What will happen?)
  • 18:58, 4 March 2024 Lisa talk contribs posted a new comment on X1001 (Hi,please refer to NVMe SSD boot with the Raspberry Pi 5#FAQ)
  • 18:55, 4 March 2024 Lisa talk contribs posted a new comment on C779 (Hi,The LED does not support setting, you can use something to cover it.)
  • 18:53, 4 March 2024 Lisa talk contribs posted a new comment on X729 (Hi,X729 is not compatible with Pi5. Please refer to X1200/X1201/X1202 UPS for Pi5.)
  • 18:44, 4 March 2024 Lisa talk contribs posted a new comment on X1002 (Hi,Sorry for the inconvenience, could you tell us your order number? Where did you buy it? It may be a problem with the mounting holes of the X1002 board. Please contact us via email and we will provide a solution. support@geekworm.com)
  • 18:38, 4 March 2024 Lisa talk contribs posted a new comment on X728 (Hi,X728 not support 3xAA adaptor)
  • 17:58, 4 March 2024 46.142.176.194 talk posted a new comment on NASPi Gemini 2.5 (I am planning to use a high quality linear power supply with the NASPi Gemini 2.5 V2.0 Dual 2.5 Inch SATA HDD/SSD NAS Storage Kit with DC 6-18V Wide Voltage Input The power supply can provide 12, 15 or 16V / 3A. I am using a RPi 4 and just a single 8TB Samsung 870 QVO SSD (according to spec, it needs 3.3 Watt max.) Will that very linear power supply be sufficient for the NASPi Gemini 2.5 V2.0? If so, would it also be sufficient, If I add a second SSD and use Raid mode?) Tags: Mobile web edit, Mobile edit
  • 19:24, 3 March 2024 87.165.244.136 talk posted a new comment on X1003 (dmesg shows: [ 0.394368] brcm-pcie 1000110000.pcie: host bridge /axi/pcie@110000 ranges: [ 0.394376] brcm-pcie 1000110000.pcie: No bus range found for /axi/pcie@110000, using [bus 00-ff] [ 0.394387] brcm-pcie 1000110000.pcie: MEM 0x1b00000000..0x1bfffffffb -> 0x0000000000 [ 0.394392] brcm-pcie 1000110000.pcie: MEM 0x1800000000..0x1affffffff -> 0x0400000000 [ 0.394398] brcm-pcie 1000110000.pcie: IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000 [ 0.395575] brcm...) Tags: Mobile web edit, Mobile edit
  • 18:58, 3 March 2024 87.165.244.136 talk posted a new comment on X1003 (The lspci brings this answer: 0001:00:00.0 PCI bridge: Broadcom Inc. and subsidiaries Device 2712 (rev 21) 0001:01:00.0 Ethernet controller: Device 1de4:0001) Tags: Mobile web edit, Mobile edit
  • 18:33, 3 March 2024 87.165.244.136 talk posted a new comment on X1003 (I have a KingSpec M.2 NVMe mounted and it does not show up with lsblk. The blue light is on. How can i check what the problem is?) Tags: Mobile web edit, Mobile edit
  • 06:22, 3 March 2024 67.189.231.55 talk posted a new comment on P579 (bought P579 case and shield for it. Went together fine, waiting on drive so have no comments on operation. Was there or is there going to be a sw cover for the pi power sw. Using a fingernail now to operate it and it is exposed to dust and quite delicate.)
  • 03:56, 3 March 2024 73.242.156.151 talk posted a new comment on X1001 (I got the X1001 and a Crucial P3 nvme but Raspberry Pi does not see it. Is the Crucial SDD compatible and how do I troubleshoot?)
  • 02:24, 3 March 2024 93.42.109.113 talk posted a new comment on X728 (Can I use 3xAA adaptor instead of 18650 battery?)
  • 16:40, 2 March 2024 77.39.172.42 talk posted a new comment on X1002 (Just purchased and discovered the mess with the screws... SHAME ON YOU! people are complaining about this since a month and you still sell this kit with wrong screws! Please provide detailed specs on what screws should I buy now. I can't wait for sending back the item and search for an alternative!) Tags: Mobile web edit, Mobile edit
  • 23:07, 1 March 2024 148.252.147.227 talk posted a new comment on X729 (I would like to know this too. Having a large range input would be useful and none of the official RPi 5 ones can cater for that.) Tags: Mobile web edit, Mobile edit
  • 18:01, 1 March 2024 93.240.96.232 talk posted a new comment on C779 (Hello, is it possible to turn of the onboard led?)
  • 14:44, 1 March 2024 Lisa talk contribs posted a new comment on X1001 (Hi,It is difficult to determine the reason for the very slow speeds. It may be an issue with the FFC cable or a compatibility issue. Thanks for your feedback.We will continue to monitor this issue to find the best solution.)
  • 12:37, 1 March 2024 Lisa talk contribs posted a new comment on X728 (Hi,If the board is burned, we do not recommend continuing to use it to avoid safety concerns.)
  • 12:27, 1 March 2024 Lisa talk contribs posted a new comment on X1004 (Hi,We will be upgrading P579 Case to support X1004, the new version is in production. It will come soon. Please stay tuned for updates to our wiki.Thank you.)
  • 12:23, 1 March 2024 Lisa talk contribs posted a new comment on X1004 (Hi,We have not tested Coral M.2 SSD; but please confirm 2 things: ① The SSD interface must be NVMe M.2 Key-M or Key-B&M; ②We recommend avoiding the NVMe SSD drives which is equipped with a Phison controller due to their proven incompatibility. You can run "lspci" command to check the controller brand of the SSD.)
  • 12:09, 1 March 2024 Lisa talk contribs posted a new comment on LVDS2 (Hi,LVDS2 and LVDS 1.5/V20 are different manufacturers with different board designs and cables, there is no functional difference.)
  • 11:40, 1 March 2024 Lisa talk contribs posted a new comment on X1001 (Hi,Normally there is no need to power X1001 separately. SSD power supply needs can be met through FFC cables. If you want to power X1001 separately, you can use a 2pin wire to power it through 5V IN of X1001.)
  • 21:59, 28 February 2024 94.254.123.42 talk posted a new comment on X728 (Hi. I have the 2.1 version without the "Battery Reverse Polarity Protection circuit".. and I really wish I did because I did a oopsie. I realized the issue a second later when smoke started to plume. I thought the device was dead, but interestingly enough, it does seem to work still when I put them in correctly - so question is, is it dangerous to use the device now when "something" have burned or did it not "burn enough" to break the board?)
  • 19:56, 28 February 2024 46.59.71.143 talk posted a new comment on X1004 (When will the case be out?)
  • 01:22, 27 February 2024 69.42.12.30 talk posted a new comment on LVDS2 (What is the difference between this LVDS2 model and what your site says is the "newest" LVDS 1.5 model? To be clear, I am NOT asking about V20 vs 1.5. Is this LVDS2 model actually the newest model (newer than even the 1.5 model) but the text description on your site is just out of date? Or is 1.5 actually the newest model?) Tags: Mobile web edit, Mobile edit
  • 23:40, 26 February 2024 99.237.2.44 talk posted a new comment on X885-software (On a fresh install of the OS, be sure to 'apt -y install git' before trying to run the first script. It's not installed automatically.)
  • 22:55, 26 February 2024 77.242.86.148 talk posted a new comment on X1001 (I ordered a X1001 board and as soon as I connect an SSD to it, it makes a high pitched noise similar to coil whine. Is there something I can do about it? Otherwise it works fine.)
  • 14:56, 26 February 2024 103.192.227.88 talk posted a new comment on X729-Software (1. OLED displays voltage and current output. 2. You can rfer to bat.py file)
  • 14:55, 26 February 2024 103.192.227.88 talk posted a new comment on X729 (OLED displays voltage and current output)
  • 14:51, 26 February 2024 Harry talk contribs posted a new comment on X1002 (We are very sorry, this is our mistake, we have also discovered this problem and are working on it. You can return it for a refund)
  • 14:48, 26 February 2024 Harry talk contribs posted a new comment on X1201 (Judging from the fault description, it must be that I2C is not enable.Check ing your config.txt)
  • 14:47, 26 February 2024 Harry talk contribs posted a new comment on X1201 (This is a UPS, so it is normal logic to supply power from the type-c of the UPS.)
  • 14:45, 26 February 2024 Harry talk contribs posted a new comment on P580 (Thank you for your feedback. It may be that the plastic case is the final case and we will consider designing & manufacturing a plastic case as well!)
  • 14:44, 26 February 2024 Harry talk contribs posted a new comment on LVDS Adapter (Sorry, not supported)
  • 14:43, 26 February 2024 Harry talk contribs posted a new comment on X728 (There may be those who prefer the old ways)
  • 14:41, 26 February 2024 Harry talk contribs posted a new comment on X876 (X876 is not compatible with PI 5. You can refer to X1001)
  • 00:19, 26 February 2024 73.176.32.190 talk posted a new comment on X1002 (I had to drill out the holes in the standoffs on the board to get the screws through the raspi and the X1002...used the brass nuts to secure the screws on the X1002 side. Worked and X1002 functions.)
  • 12:33, 23 February 2024 45.46.196.207 talk posted a new comment on X729 (One of the features is "Measure both output voltage and current draw over I2C with high precision". Could you provide sample?)
  • 16:49, 22 February 2024 103.193.138.118 talk posted a new comment on X1201 (What happens if power is applied to the USB-C of the Raspi? Documentation says not to do it, but what happens if you do anyway? I'd like to use the USB-C port as a device port, but not if there's a risk I'll burn out the X1201 or the Pi if I plug the wrong thing in...)
  • 08:38, 22 February 2024 110.93.11.249 talk posted a new comment on P580 (Purchased the X1002 NVMe bottom board shield and the compatible P580 case. The case is okay, but there is no button for the RPi5's on off button, just a cutaway on the case. This means that I will have to insert an object into the cutaway to reach to button, which is a few mm back from the outside wall of the case. Geekworm, a simple button would make the case a lot nicer. Other than that, no complaints.)
  • 19:51, 20 February 2024 91.90.116.8 talk posted a new comment on LVDS Adapter (Hello, I have two video inputs that I need to swith and send to LCD. I want to use hdmi switch 2 in 1 out. The problem is that one inpout is going via HDMI, second is LVDS RGB 1ch 6-bit. Is it possible to convert my LVDS to HDMI with your board?)
  • 17:59, 20 February 2024 139.30.157.71 talk posted a new comment on X728 (How about someone replaces the Links to X728-Software to X728-script, which actually works and is maintained.)
  • 02:49, 20 February 2024 65.33.163.151 talk posted a new comment on X876 (Are the X876 pogo pins compatible with the RPi 5B. Dave)
  • 08:02, 19 February 2024 67.159.155.175 talk posted a new comment on X1002 (Same here screws will not fit)
  • 07:34, 19 February 2024 67.159.155.175 talk posted a new comment on X1002 (Same here screws will not fit)
  • 00:54, 19 February 2024 120.127.182.112 talk posted a new comment on P122 (16.54 i mean(rpi is 1mm height))
  • 00:53, 19 February 2024 120.127.182.112 talk posted a new comment on P122 (after a quick check(don't wanna disassemble it), the total height with rpi installed is 25.54mm(w/ 0.02mm precision) approximately, the lower plate is 8mm, so i guess the upper plate is 17.54mm)
  • 15:51, 17 February 2024 45.46.196.207 talk posted a new comment on X729 (any problems with using it on a raspberry pi 5?)
  • 08:20, 17 February 2024 50.52.101.217 talk posted a new comment on X1003 (Using a solidigm P41 plus 2230 1TB drive. Typing this comment with it as the boot drive on my Raspberry Pi 5. Followed directions on the wiki here. Had to reboot twice before it worked. Very fast.)
  • 01:16, 16 February 2024 98.195.211.0 talk posted a new comment on NVMe SSD boot with the Raspberry Pi 5 (I used a hot air station to unsolder and solder it into place)
  • 11:27, 15 February 2024 64.135.211.168 talk posted a new comment on X1003 (Got my X1003 working with my rpi5 using a "with a 512GB Inland TN436 NVMe M.2 Gen 4x4 SSD", and cloned the boot microSD to it using my Gerling's rpi-clone script. The RPI5 doesn't want to boot from the NVMe even tho the 6 was added to the boot order line in the eeprom and the PCIE_PROBE=1 is in ther.)
  • 10:14, 15 February 2024 64.135.211.168 talk posted a new comment on X1003 (UPDATE!! RETURNED the KINGSPEC nvme. It was making it so that the X1003 had NO LIGHTS illuminated. Replaced it with a 512GB Inland TN436 NVMe M.2 Gen 4x4 SSD from amazon [WORKS even tho it has Phison E19 controller]. It arrived today, i put it in the X1003 and i had lights. I added the 6 to the end of the boot order in the eeprom. Device showed up. I ran the rpi-clone script (geerling's from his git). It went through all the glorious cloning motions. Now i'm just working on getting the rpi...)
  • 04:33, 15 February 2024 74.203.198.222 talk posted a new comment on X1003 (CL1-3D128-Q11 NVMe SSSTC 128GB is working great, although it is small. Never seen a pi run so fast.)
  • 02:58, 15 February 2024 188.77.122.153 talk posted a new comment on X1003 (Yo he probado con un KingSpec M.2 NVMe 512 GB 2242 y reconoce la unidad, las luces permanecen encendidas, copia la SD al SSD sin problemas, pero luego no arranca desde el PCIe. ¿alguna solución?)
  • 03:18, 14 February 2024 77.136.66.21 talk posted a new comment on X1003 (Works well with SSD SK Hynix BC711 512go 2242) Tags: Mobile web edit, Mobile edit
  • 19:56, 13 February 2024 207.173.135.189 talk posted a new comment on NVMe SSD boot with the Raspberry Pi 5 ([SOLVED] Errors booting from NVME with X1002 base and Crucial T500 Gen4 NVMe. Symptoms: Either: 1. *Extremely long* boot times (~240 seconds) with pcieport and nvme errors in dmesg including: [ 4.230345] pcieport 0000:00:00.0: AER: Corrected error received: 0000:00:00.0 [ 4.230359] pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID) [ 4.230362] pcieport 0000:00:00.0: device [14e4:2712] error status/mask=00001000/00002000 [ 4.230366...)
  • 13:48, 12 February 2024 175.143.167.98 talk posted a new comment on X630 (Does the X630-A2 audio board work with PiKVM V2 DIY (using X630 and X630-C1 case)? Is any additional configuration required like on PiKVM-A3 or should this just work with pikvm without additional configuration?)
  • 13:30, 12 February 2024 45.46.196.207 talk posted a new comment on X729-Software (Is there any information and demo script on the current/voltage/power monitor data from address 40?)
  • 10:05, 12 February 2024 76.158.60.16 talk posted a new comment on M400 (Don't purchase this product. Run This documentation is useless. They don't even show a picture of how to connect the ribbon cable.)
  • 23:36, 11 February 2024 70.106.209.100 talk posted a new comment on X1001 Hardware (Found it in the FAQ in the main page: A: The X1000 does not reserve the nut column to fix the 2230/2242/2260 SSD. Based on our test, you can secure the 2230/2242/2260 SSD using an M2*6mm screw and 2pcs M2 nuts. Place one M2 nut under the SSD, then use the M2*6mm screw and the other M2 nut to fasten the SSD.)
  • 23:09, 11 February 2024 70.106.209.100 talk posted a new comment on X1001 Hardware (Also need standoff for 2242 size ssd. It appears that the 2280 standoff is permanently mounted to the X1001.)
  • 13:32, 11 February 2024 83.239.24.170 talk posted a new comment on X-C1 Software (Fan control and work with power button for NASPi Gemini 3.5 and Raspberry Pi Debian github.com/aardzhanov/naspi35_xscript)
  • 13:32, 11 February 2024 83.239.24.170 talk posted a new comment on XScript (Fan control and work with power button for NASPi Gemini 3.5 and Raspberry Pi Debian github.com/aardzhanov/naspi35_xscript)
  • 13:31, 11 February 2024 83.239.24.170 talk posted a new comment on XScript (Work with debian?)
  • 03:51, 11 February 2024 84.187.177.85 talk posted a new comment on X1002 (I mean 2230 or 2242)
  • 03:50, 11 February 2024 84.187.177.85 talk posted a new comment on X1002 (How to fix a 2240 nvme ssh.. there is a hole but no fix for the screw)
  • 21:31, 10 February 2024 185.228.19.78 talk posted a new comment on X1002 (Would this support the Coral M.2 Accelerator B+M key, aka Edge TPU?) Tags: Mobile web edit, Mobile edit
  • 21:20, 10 February 2024 185.228.19.78 talk posted a new comment on PiKVM-A3 (Any plans to update the KVM-A3 case for Raspberry Pi 5?) Tags: Mobile web edit, Mobile edit
  • 21:10, 10 February 2024 185.228.19.78 talk posted a new comment on P165 (More specifically, an updated P165-B for rpi5?) Tags: Mobile web edit, Mobile edit
  • 21:07, 10 February 2024 185.228.19.78 talk posted a new comment on P165 (Any plans to release a version of this for the Raspberry Pi 5?) Tags: Mobile web edit, Mobile edit
  • 21:05, 10 February 2024 185.228.19.78 talk posted a new comment on P122 (What is the height of the top heatsink piece? And bottom heatsink piece? I assume I could use either/or?) Tags: Mobile web edit, Mobile edit
  • 20:25, 10 February 2024 93.131.169.229 talk posted a new comment on X1001 (Same here, I get about 60MB/sec. Not what I would expect from PCIe. In my old case with USB bridge I get more than 110 MB/sec with the same drive.) Tags: Mobile web edit, Mobile edit
  • 20:24, 10 February 2024 93.131.169.229 talk posted a new comment on X1001 (It works, but performance is awful. I have double the speed on my RPi4 in Argon40 NVME case and that is only using USB bridge and not PCIe. I'm deeply disappointed by the X1001...) Tags: Mobile web edit, Mobile edit
  • 14:00, 10 February 2024 50.37.95.233 talk posted a new comment on X1001 Hardware (Can you please post the correct mounting screw size for 2242 ssd?) Tags: Mobile web edit, Mobile edit
  • 12:45, 10 February 2024 64.135.211.168 talk posted a new comment on X1003 (Which Phison controller is the problem? E21 or E13? Or BOTH??)
  • 12:33, 10 February 2024 64.135.211.168 talk posted a new comment on X1003 (does NOT work with KINGSPEC NX 2230 512GB -- this PCIe m-keyed m.2 nvme makes the lights on the X1003 go out.)
  • 06:37, 10 February 2024 47.152.127.211 talk posted a new comment on X-UPS1 (Can you post example usage of the PH2.0 signal cable connector and the external momentary switch connector.)
  • 05:41, 10 February 2024 108.193.152.114 talk posted a new comment on X1001 (I'm able to crimp my own JST-to-DuPont cables. Could I just power the X1001 via the GPIO pins with such a cable?)
  • 00:44, 10 February 2024 188.250.82.104 talk posted a new comment on X882 (Hello, how can I use the power button on the board? Do I have to connect the power to the board? Because it is currently being powered by the Pi4) Tags: Mobile web edit, Mobile edit
  • 23:13, 9 February 2024 82.220.82.107 talk posted a new comment on X1002 (Same here: those 4 standoffs have been implemented as M2. That will no longer fit the screws and / or the 4 5mm feet. In my delivery it says X1002 V1.1 - maybe te problem is in all deliveries with V1.1 ??)
  • 07:05, 9 February 2024 98.168.105.253 talk posted a new comment on X708-A1 (Is there a drawing or 3d model for this board? I need to 3d print a custom case for it. Thanks!!)
  • 05:24, 9 February 2024 96.88.172.9 talk posted a new comment on X630 (How long will this product be in production/be supported?)
  • 10:52, 8 February 2024 108.238.59.28 talk posted a new comment on H508 (Can I purchase the H508 copper pad? Just need the copper pad.)
  • 10:37, 8 February 2024 98.60.21.52 talk posted a new comment on X1002 (Just received my unit and the M2.5x10mm screws do not fit in the X1002--it seems like the integrated standoffs were tapped incorrectly. The screws fit fine in the M2.5x5mm gold standoffs. Anybody else have this issue--am I crazy? I've done many M2.5 projects.)
  • 13:46, 7 February 2024 38.45.128.198 talk posted a new comment on X1003 (Lexar SSD Play 1TB showed up, successfully configured as the only disk and booted from it. Using test script from "Benchmark ssd on linux: How to measure the same things as crystaldiskmark does in windows" on Unix StackExchange. Results: Sequential Q32T1 Read: 407MB/s [ 12 IOPS] Sequential Q32T1 Write: 407MB/s [ 12 IOPS] 4KB Q8T8 Read: 397MB/s [ 99319 IOPS] 4KB Q8T8 Write: 394MB/s [ 98554 IOPS] 4KB Q32T1 Read: 392MB/s [ 98225 IOPS] 4KB Q32T1 Write: 367MB/s [ 91838 IOPS] 4KB...)
  • 08:32, 6 February 2024 47.220.145.84 talk posted a new comment on NVMe SSD boot with the Raspberry Pi 5 (How do you change the nut from the 2242 position to the 2230 position?)
  • 05:24, 6 February 2024 93.226.210.72 talk posted a new comment on X1003 (Transcend MTE400S 1 TB NVMe PCIe Gen3 x4 M.2 2242 (TS1TMTE400S) seems not to be compatible. First installation tests succsessfully. Image copy worked, but lot of error messages while booting. Raspi freezes after boot. Booting with an usb nvme-adapter was successfull. No errors.)
  • 02:59, 6 February 2024 213.47.189.61 talk posted a new comment on NVMe SSD boot with the Raspberry Pi 5 (oha ... flushed a new eeprom and VOILA now it works :-))
  • 02:31, 6 February 2024 213.47.189.61 talk posted a new comment on NVMe SSD boot with the Raspberry Pi 5 (hi from vienna, i have no luck till now withj the x1002: * first i had a WD black 770 and read that this is on the incompatible list * returned it and ordered a crucial t500 1TB nvme ssd but still there is NO reaction (no blue light, nothing reported in lspci,..) looks like the x1002 is not found / connected / or ist just plain dead * did the edits as described above in boot/config.txt * no success any advice please cheerz)
  • 19:23, 5 February 2024 45.89.242.200 talk posted a new comment on X1004 (Will the Coral M2 card run on this current firmware?) Tags: Mobile web edit, Mobile edit
  • 11:40, 5 February 2024 97.83.76.71 talk posted a new comment on X1003 (Samsung SSD 256GB PM991 M.2 2242 42mm PCIe 3.0 x4 NVMe MZALQ256HAJD MZ-ALQ2560 Solid State Drive PCIE 2 Category Test Result HDParm Disk Read 419.51 MB/sec HDParm Cached Disk Read 412.94 MB/sec DD Disk Write 284 MB/s FIO 4k random read 106113 IOPS (424455 KB/s) FIO...)
  • 08:17, 5 February 2024 97.83.76.71 talk posted a new comment on X1003 (Samsung SSD 256GB PM991 M.2 2242 42mm PCIe 3.0 x4 NVMe MZALQ256HAJD MZ-ALQ2560 Solid State Drive also works)
  • 04:38, 5 February 2024 94.209.37.161 talk posted a new comment on X1201 (However I do not see #36 light up. What did I miss ? -> If #36 is missed, check if all jumper pins align. -> Unscrew the screws and re-align the Pi. -> Push down on the Pi so you can feel the pogo pins bounce. -> While holding down the Pi, tighten the screws.)
  • 03:29, 5 February 2024 94.209.37.161 talk posted a new comment on X1201 (I enabled i2c and rebooted the machine. Battery is charging. $ sudo i2cdetect -y 1 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: -- -- -- -- -- -- -- -- 10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- --...)
  • 01:42, 5 February 2024 108.238.59.28 talk posted a new comment on H508 (Yes. I want just the H508 copper pad.) Tags: Mobile web edit, Mobile edit
  • 18:56, 4 February 2024 94.209.37.161 talk posted a new comment on NVMe SSD boot with the Raspberry Pi 5 (While following the instructions I noticed the following messages in dmesg: pcieport 0000:00:00.0: AER: Corrected error received: 0000:00:00.0 pcieport 0000:00:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID) pcieport 0000:00:00.0: device [14e4:2712] error status/mask=00001000/00002000 pcieport 0000:00:00.0: [12] Timeout I am running the latest eeprom CURRENT: Fri 5 Jan 15:57:40 UTC 2024 (1704470260) LATEST: Fri 5 Jan 15:57:40 UTC 2024 (17044702...)
(newest | oldest) View ( | ) (20 | 50 | 100 | 250 | 500)
Retrieved from "https://wiki.geekworm.com/Special:Log/comments"