Difference between revisions of "X862 V1.0"
Jump to navigation
Jump to search
Line 47: | Line 47: | ||
| NOTES || | | NOTES || | ||
<references /> | <references /> | ||
− | * | + | * NGFF SATA SSD is not included |
− | * | + | * Compatible with M.2 NGFF SATA SSDs only, not compatible with NVMe M.2 SSDs |
+ | * As with all SSDs, new media must be formatted before use | ||
+ | * SSDs use exceptionally high performance storage media that will run hot when under load | ||
+ | * Older SSD drives with less efficient flash media may not perform as well as newer drives | ||
|} | |} | ||
Revision as of 18:24, 12 May 2020
Overview
This is the X862 M.2 NGFF SATA SSD Shield for Raspberry Pi 4 model B, it provides a complete storage solution for raspberry pi 4. It supports multiple M.2 NGFF SSD lengths including: 2280, 2260, 2242, 2230. X862 is upgraded from X860.
Important NOTE:
This X862 is not fit to ROCK64 and Raspberry Pi 3B+ /3B because the difference of USB 3 position. Please refet to X860 if you want use M.2 NGFF SATA SSD on the Raspberry Pi 3B+/3B or ROCK64 board.
Features
FOR USE WITH |
Raspberry Pi 4 Model B |
Operating System |
All Raspberry Pi operating systems |
KEY FEATURES |
|
SPECIFICATION |
|
NOTES |
|
Packing List
- X862 mSATA SSD shield x 1
- USB3.1 jumper x 1
- Screw M2.5 *6mm x 6
- Spacer M/F M2.5 *12mm x 4
- Spacer F/F M2.5 *8mm x 4
- Screw driver x 1
- Screw M2.5 *6mm x 1
Enable comment auto-refresher
Anonymous user #3
Permalink |
Walker
Anonymous user #3
Permalink |
Anonymous user #3
Anonymous user #1
Permalink |
Cindy
Anonymous user #2