Difference between revisions of "X828 Case"
Jump to navigation
Jump to search
(No difference)
|
Revision as of 19:58, 6 January 2020
Contents
Overview
This is a Geekworm deisgn metal case with momentary power control switch and super mute 4010 cooling fan for raspberry pi 4 and 2 pcs X828 2.5" SATA Storage Board + X735 Power Management Board, it is a perfect choice for raspberry pi nas storage DIY user.
Note:
- 1. The power control switch only work when connect to the X735 Power Management Board.
- 2. The Max. compatible thickness of the 2.5" SATA SSD/HDD is 10.4mm/0.41inch. (The stander 2.5" SATA SSD/HDD is 9.2mm/0.36inch);
- 3. The Raspberry Pi 4 Model B, X828 2.5" SATA boards, 2.5" SATA SSD/HDD, X735 power management board are all not included in the packing list.
- 4. X828 metal case only support install 2 pcs X828 expansion board, also support X735 board.
Features
- Power switch with beautiful LED indicator to control the power of X828 and the Raspberry pi 4 Model B(The power switch only work when use with X735 board);
- Support super mute cooling fan provides good heat dissipation;
- Reserved Side Slot(Interface) for GPIO/FFC Cable
- Reserved Slot for X735 DC power Port, microusb port and Type-C Power Port, when use with X735 board, the power supply should be connected to X735 DC 5V IN port.
- VESA mount: 75mm
- Case Size(Installation): 11.5x9.5x9 (cm) / 4.53 x 3.74 x 3.54 (inch);
- High quality metal material with surface galvanized process;
- Equipped with 4010 big cooling fan in X828 case; But if use with X735 board, there is no need to use the cooling fan inside X828 case.
Packing List
- 1 x X828 Metal Case (with 4 pieces of M3 screws)
- 1 x Power Control Switch
- 1 x Mini Fan(with 4 pieces of screws)
Enable comment auto-refresher
Anonymous user #1
Permalink |