LP3 Case

LattePanda 3 Delta Case

Case for LattePanda 3 Delta

Aluminum Alloy Case for LattePanda 3 Delta

Overview

This is a aluminum alloy passive cooling case,which is specially designed for LattePanda 3 Delta by Geekworm.It is a passive heat dissipation case,so you don't need to use a fan to cool the motherboard and have to endure the noise of the fan.The case reserve all the interfaces and GPIO pins of LattePanda 3 Delta.
Aluminum alloy has excellent thermal conductivity. We use high-quality ShinEtsu X-23-7921-5 CPU silicone grease as the filling material for the housing and CPU. This ensures that heat is quickly transferred to the aluminum alloy housing.
In order to facilitate the rapid heat dissipation of the housing, this case also supports the installation of a fan to dissipate the housing,but this is not required.You could use cooling fans like 4007, 4010, 4012 fan. The fan dimensions should be 40x40mm with 32±0.3mm hole, and it is recommended that you use M3 nylon plastic screws.
LattePanda 3 Delta is a small x86 Windows single board computer (SBC), featuring Intel 11th generation mobile quad-core quad-thread processor N5105 with up to 2.9GHz burst frequency.It can operate both Windows 10/Windows 11 and Linux OS. And more details you can refer to LattePanda offical website

Please remove the onboard cooling fan of LattePanda 3 Delta before installation
Passive cooling aluminum alloy case with good dissipation
All ports and slots of the case can match with LattePanda 3 Delta board well
Four fan holes are reserved in the upper cover
Smooth and straight aluminum material
Reinforced aluminum material, lightweight and durable, long-lasting stainlessEasy to install
Ultra-thin design
Open case design, and don't need to worry it will effect wifi signal any more
Equipped with silicone grease and thermal pad
Size:125*78*18.5mm / 4.92*3.07*0.73inch