Open main menu

X760

Revision as of 18:40, 2 January 2020 by Admin (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

X760 V1.2 POE expansion board
X760 V1.2 POE expansion board
X760 V1.2 POE expansion board
X760 V1.2 POE expansion board

Contents

Overview

Power over Ethernet (PoE) expansion board can make your project wiring a breeze - and best of all they work to connect any 802.3at/802.3af-capable router to your Raspberry Pi 3 model B+ and 4 model B. You can now power your Raspberry Pi and other devices in any location with just a single cable. Perfect for removing the clutter of wires and for reliable use in remote locations.

This is an economical, practical, high-performance, and reliable Isolated 5V 5000mA PoE+ expansion baord with a variety of power output connectors based on IEEE 802.3at standard. It can divide power from a network cable, and can be used with any PoE/POE+ injector that is compatible with IEEE 802.3at /802.3af, and supply power for Raspberry Pi and other non-PoE network equipment.

Simply attach the standoffs in the four fixed holes of the expansion board, then connect to the Raspberry Pi's pin header using the specially-made daughter board X760-A1. Once the board is connected, you can power your Pi through the RJ-45 network connector.

The X760 provides a 5V maximum 5A share power output, and it supports raspberry pi board with POE function such as raspberry pi 4 model b and raspberry pi 3 model b+; and X760 complies with the 802.3at POE standard and backward compatible with 802.3af also.

Features

  • IEEE802.3at Standard (backward compatible with 802.3af)
  • Power Output: 5Vdc Max 5A
  • Fully isolated switched-mode power supply
  • Uses Texas Instruments' high-power, high-efficiency PoE interface PD and PWM controller
  • Integrated Short Circuit Protection and Output Over Voltage Protection
  • Supplies total share 5 Amps regulated DC power and output via XH2.54 connectors, screw terminal and USB-A sockets
  • No soldering and cabling required
  • Mounting holes and standoffs provide mechanical stability of the RPi and X760 assembly

Specification

  • Power input: 38~57Vdc
  • Output voltage: 5Vdc +/-5%
  • Output current: 4.8~5.5A (IEEE 802.3at), 2.5A (IEEE 802.3af)
  • Efficiency: ≥ 80%
  • Isolation: 1500V

WARNING:

DO NOT APPLY POWER TO YOUR RASPBERRY PI VIA THE PI's MICRO USB or Type-C SOCKET.

Packing List

  • 1 x X760 board
  • 1 x X760-A1 board
  • 1 x Spacer M/F M2.5*11+6mm
  • 4 x Spacer M/F M2.5*5+6mm
  • 4 x Spacer F/F M2.5*17mm
  • 4 x Screw M2.5*6mm

Document

Add your comment
Geekworm Wiki welcomes all comments. If you do not want to be anonymous, register or log in. It is free.