Difference between revisions of "X708-Hardware"
Jump to navigation
Jump to search
Line 38: | Line 38: | ||
| ASD | | ASD | ||
(Auto shutdown) | (Auto shutdown) | ||
− | Pin 5&6 || | + | Pin 5&6 |
+ | || | ||
* Short - Automatic shutdown enabled when battery low (≤3Vdc ) | * Short - Automatic shutdown enabled when battery low (≤3Vdc ) | ||
* <span style="color:red;">Procedure to enable ASD function --IMPORTANT</span> | * <span style="color:red;">Procedure to enable ASD function --IMPORTANT</span> |
Revision as of 11:54, 25 July 2020
- Power Jack and Connectors
Power input | 5Vdc +/- 5% , ≥3A |
DC Power Plug Size | 5.5*2.5mm |
USB power in socket | Type-C |
UPS power output | 5.1Vdc 8A |
Power output connector | XH2.54mm 2pin |
- X708 powers the Raspberry Pi via the 40-pin header (Pin 2 & 4)
- Don't power the Raspberry Pi via the Pi's type-C USB socket
- X708 can be powered via the onboard DC jack or Type-C USB power socket
Jumper Name | Usage |
---|---|
PLD
(Power loss detection) Pin 1&2 |
|
AON
(Auto power-on) Pin 3&4 |
|
ASD
(Auto shutdown) Pin 5&6 |
1. Battery voltage must be >3Vdc 2. Insert the battery into the holder 3. Wait 3 seconds then insert the jumper 4. If the jumper inserted before battery, remove battery & jumper then repeat step 1, 2 and 3.
|
Enable comment auto-refresher
Anonymous user #8
Permalink |
Walker
Anonymous user #15
Permalink |
Lisa
Anonymous user #15
Permalink |
Lisa
Anonymous user #16
Lisa
Anonymous user #14
Permalink |
Anonymous user #13
Anonymous user #14
Anonymous user #13
Permalink |
Lisa
Anonymous user #12
Permalink |
Lisa
Anonymous user #10
Permalink |
Lisa
Anonymous user #10
Permalink |
Lisa
Lisa
Anonymous user #10
Lisa
Anonymous user #9
Permalink |
Lisa
Anonymous user #8
Permalink |
Lisa
Anonymous user #7
Permalink |
Anonymous user #3
Permalink |
Anonymous user #4
Anonymous user #5
Anonymous user #5
Xiali
Anonymous user #2
Permalink |
Anonymous user #5
Anonymous user #6
Anonymous user #11
Anonymous user #1
Permalink |