X635-Software
Jump to navigation
Jump to search
X635 Software Guide base on Raspberry Pi OS bullseye
To use the HDMI to CSI-2 bridge, you will need to enable Enable legacy camera support.
Open a terminal window and type the following command:
sudo raspi-config
Then use the cursor keys to scroll down to "Interface Options".
Press the ‘Enter’ key
Make sure ‘Legacy Camera Enable/disable legacy camera support’ is selected and press the ‘Enter’ key. " Use the cursor keys to select and press the ‘Enter’ key
Press ‘Enter’ again to confirm
Then select 'Finish' to exit.
Run the following command to reboot device
sudo reboot
X635-software-18.png
Enable comment auto-refresher