Open main menu

Contents

X20-DAC INTRODUCTION

Operating System: VOLUMIO, MOODE

For Use With: Raspberry Pi 1 Model B+/ 2 Model B / 3 Model B

X20-DAC BOARD

Features

  • ESS Technology flagship DAC chipset (ES9028Q2M) for best sound quality
  • 129dB DNR -120dB THD+N
  • 32bit/384kHz Bit to Bit Playback & Native DSD Playback (Use with our XMOS I2S module)
  • JRC MUSES8920 high quality Audio J-FET input dual OP AMP
  • Ultralow phase noise 100MHz HiFi TCXO
  • Texas Instruments ultra-low-noise voltage regulator
  • Dedicated individual DVCC, AVCCL, AVCCR, Oscillator 3.3V power supply
  • Selected high quality components (WIMA Film capacitor, Panasonic low ESR aluminum electrolytic capacitor, Gold-plated RCA connectors etc)
  • Can connect to our XMOS USB-to-I2S module directly
  • Can be used individually with only 3 wire I2S signal connected from other i2s interface
  • All dual OPAMP in single dip8 package IC can be used
  • High performance and compact Raspberry Pi DAC solution for everyone

Specification

  • Power supply: +5Vdc ±5%, +15Vdc ±5%, -15Vdc ±5%
  • Analog audio output level: 2V RMS
  • Resolution/Sampling Rate: Up to 24bit / 192KHz (Raspberry Pi I2S); Up to 32bit / 384KHz (Use with XMOS USB to I2S board); DSD64 /DSD128 (Use with XMOS USB to I2S board).
  • PCBA size : 101.5 x 56mm x 34.5mm, PCB size : 85 x 56mm

X10-PWR POWER SUPPLY BOARD

Features

  • Fully regulated linear power supply board for X10 / X20 series DAC
  • Texas Instruments ultralow noise TPS7A470x regulator
  • Four individual 5.2V/ 5.0V/-15V/+15V to power the Raspberry Pi (1), DAC chipset and OPA
  • High performance ELNA and Nichicon Audio Purpose Capacitors
  • For use with R-core transformer

Specification

  • Input rating : 6VAC ±5% 2.5A, 6VAC ±5% 0.5A, 15VAC ±5% 0.55A, 15VAC ±5% 0.55A
  • Output voltage:5Vdc ±5% 2.5A, 5Vdc ±5% 0.5A, +15Vdc ±5% 0.5A, -15Vdc ±5% 0.5A,
  • PCBA size : 85mm x 56mm x 50.5mm, PCB size : 85 x 56mm

Notes:

Low voltage indicator might show up during boot, it does not affect audio performance.

WARNING:

DO NOT APPLY POWER TO YOUR RASPBERRY PI VIA THE PI's MICRO USB SOCKET.

X10-RTR R-CORE TRANSFERMER

Features

  • For use with X10-PWR power supply board
  • High quality 35W R-core transformer
  • Equipped with AC voltage selector switch convenient to select 115/230Vac input
  • Lighted power switch
  • Equipped with detachable power cord
  • Full aluminum chassis

Specification

  • Input : AC110 / 230V ~50 / 60Hz
  • Output: 6VAC ±5% 2.5A, 6VAC ±5% 0.5A, 15VAC ±5% 0.55A, 15VAC ±5% 0.55A
  • Size 118m x 93mm x 59mm

X10-I2S BOARD XMOS USB TO I2S / SPDIF / Coaxial

Features

  • The XMOS xCORE-AUDIO Hi-Res family of parts
  • Deliver precise output with low noise/distortion for soothing, high-quality sound
  • Ideal HiFi audio solution for Raspberry Pi
  • Streamed through Raspberry Pi to I2S, DSD and/or S/PDIF interfaces
  • PCM up to 32bit /384 KHz sample rates
  • Native DSD, DoP64 and DoP128
  • Up to 192 kHz, 16/24 bit resolution S/PDIF output
  • Asynchronous Isochronous transfer from Raspberry Pi
  • Multiple OS support (Volumio, Moode Audio Player, Windows, Android etc)
  • SiTime SiT8208 ultra performance oscillator
  • Texas Instruments ultra-low-noise voltage regulator

Specification

  • Power supply: +5Vdc +/-5%
  • CODEC: I2S 16, 24, or 32 bit PCM, DSD64 and DSD128
  • PCM sample rates : 44.1, 48, 88.2, 96, 176.4, 192, 352.8, 384KHz
  • Optional S/PDIF output : Up to 192 KHz; 16/24 bit resolution
  • PCBA size : 101.5 x 56mm x 34.5mm, PCB size : 85 x 56mm

X10-HPAMP HiFi Headphone Amplifier

This optional accessories;

Features

  • Uses TI TPA6120A2 as headphone chip
  • SNR of 128dB A-Weighted and THD of 112.5dB
  • Current-Feedback Architecture
  • The best class AB high fidelity headphone amplifier for diyer to enjoy
  • Original ALPS RK27 potentiometer
  • 0.1% low noise thin film resister
  • 6.35mm and 3.5mm earphone output jack

Specification

  • Power supply: +15Vdc ±5%, -15Vdc ±5%
  • Output power: 150MW /250, 300MW /120, 1000MW /32
  • Frequency response: 20hz-30khz
  • PCBA size : 124mm x 56mm x 37.5mm, PCB size : 85 x 56mm

Software Configuration

Volumio (Version: 2.368)

Select the“PLAYBACK OPTIONS”menu, Turn off "I2S DAC" and select "xCORE-AUDIO Hi-Res 2" or "SA9227 USB AUDIO" under“Output Device.” Then reboot and you are done.  

 

Moode Audio Player (Version: 3.1)

Simply select the“Configure”menu, select "MPD" under "configuration settings", then select "USB audio device" under "Audio device", Then click “APPLY" and reboot.  

Document

Add your comment
Geekworm Wiki welcomes all comments. If you do not want to be anonymous, register or log in. It is free.


 

Anonymous user #1

38 months ago
Score 0  
hi, how to switch between USB TO I2S / SPDIF / Coaxial ?