https://wiki.geekworm.com/index.php?title=X205&feed=atom&action=historyX205 - Revision history2024-03-29T06:38:41ZRevision history for this page on the wikiMediaWiki 1.33.2https://wiki.geekworm.com/index.php?title=X205&diff=6392&oldid=prevAdmin at 10:23, 1 September 20182018-09-01T10:23:09Z<p></p>
<p><b>New page</b></p><div>{{GD Template Impl}}<br />
[[File:X205 165p3.jpg|thumb|right|X205]]<br />
[[File:IMG_7961.jpg|thumb|right|X205]]<br />
[[File:IMG_7960.jpg|thumb|right|X205]]<br />
[[File:X205 860p1.png|thumb|right|X205]]<br />
==Overvieww==<br />
X205 Expansion Board for Raspberry Pi 2 Model B / Raspberry Pi B+ (SKU:411771)<br />
<br />
== Features ==<br />
Input Voltage: 6V to 20Vdc converted to 5V, 3A via step-down DC/DC converter to power the Raspberry Pi <br />
RS232 serial communications: Control the Raspberry Pi over RS232 or connect to external serial accessories <br />
RS485 serial communications:<br />
* You will be able to have a communication port for your field bus directly connected to your RPi!<br />
* It will allow up to 32 devices to communicate through the same data line over a cable length of up to 4,000ft with a maximum data rate of 10Mbit/s.<br />
Audio:<br />
*3.5mm MIC in jack <br />
*3.5mm stereo audio jack<br />
*Audio IO connector (Microphone input and stereo audio amplifier 3.3Wx2)<br />
Wireless:<br />
*WiFi (IEEE 802.11b/g/n) with external antenna <br />
*IR sensor (38KHz)<br />
USB Storage:<br />
*Self-powered USB hub with 3 ports <br />
Real-time clock (RTC):<br />
*Based on DS3231SN with included CR2032 battery<br />
GPIO Control:<br />
*8-channel Darlington driver chip (ULN2803) allowing to control electronic circuits which require more current <br />
Misc:<br />
*Power output socket <br />
*Camera flex slot so camera can still be used with the expansion board attached<br />
*DIP switch to remove connection from RPi’s pin header<br />
*Directly connected on top of the Raspberry Pi using the board GPIO header pins <br />
*No wiring nor soldering is required <br />
*Duplicated the 40-pin header of the R-Pi in order to support existing expansion boards <br />
*Suitable for Raspberry Pi Model B+ and Raspberry Pi 2 Model B NEW!<br />
[[Category:Product Manual]]<br />
[[Category:Raspberry pi]]<br />
<comments/></div>Admin