X180

From Geekworm Wiki
Jump to navigation Jump to search
7-port stackable USB3.0 hub - Front
7-port stackable USB3.0 hub - Back
X180 interface
7-port stackable USB3.0 hub
7-port stackable USB3.0 hub + Pi 4
7-port stackable USB3.0 hub + Pi 4
7-port stackable USB3.0 hub + X735
X180 Connection

Overview

The perfect stackable 7-port USB3.1 Gen1 hub for the Raspberry Pi4! It extends one USB port on Raspberry Pi4 to 7 usable USB ports, which allows you to connect much more USB devices to your Raspberry Pi. The board size is exactly the same with Pi4 B and can be easily mounted under your Raspberry Pi.

The X180 SuperSpeed USB3.1 hub built in with two USB 3.1 Gen 1 hub Controllers which provides an easy and reliable connection with a transfer speed of up to 5 Gbps, 10x greater than USB2.0 that allows users to add 7 USB3.1 Gen1 ports for your Raspberry Pi 4 easily, backwards compatible with USB2.0 and 1.1.

The hub can be external self-powered or USB bus-powered. For more power hungry devices you can use the DC power jack (5.5*2.5mm) or JST XH2.54 connector on board as an alternative power input port.

Features

For Use With Raspberry Pi 4 Model B
Operating System All Raspberry Pi operating systems
Key Features
  • The perfect stackable 7-port USB3.1 Gen1 hub for the Raspberry Pi4
  • Easy Setup, Plug-and-Play, Without software to install, just install it in and go
  • Ultra-fast Data Transfers: Works with USB3.0 and USB2.0 to deliver ultra-fast transfer speeds
  • Stackable design allows you to connect several X180 boards on your Raspberry Pi4 (See notes)
  • Function to power the RPi via XH2.54 only needing a single power supply
  • External self-powered or USB bus-powered
  • Integrated two USB 3.1 Gen 1 Hub Controllers
  • Specially-made USB3.1 jumper to connect with Raspberry Pi - no additional cables needed
  • Fully compatible with X735 for intelligent power management and cooling your Raspberry Pi
  • Fully compatible with X710 for wide input voltage (6~36V) and intelligent power management
  • Fully compatible with X765 for powering over Ethernet (POE, 5V 5A)
  • Fully compatible with X725 for uninterruptible power supply (18650 UPS, 5.1V 8A, WOL)
Power Supply I/O ports
  • Power supply: 5Vdc +/-5% , ≥3A
  • Ports & Connectors: DC jack - 5.5x2.5mm
  • USB socket - USB 3.0 type A
  • Power connector - XH2.54 2-pin
  • PCB Size 85mm x 56mm
Notes
  • Additional M2.5*20 M/F spacer required for stackable expansion (not supplied with X180).
  • For use with original power supply unit only.
  • Don't power your Raspberry Pi via the Pi's 40-pin header and Type-C power socket at the same time.

Installation

X180 Installation Guide

Packing List

  • 1 x X180 expansion board
  • 1 x USB3.1 Connector/Jumper
  • 1 x 2-Pin Power Connection Wire
  • 1 x Power daughter board
  • 4 x Spacer F/F M2.5 x 20mm
  • 4 x Spacer M/F M2.5 x 5+6mm
  • 1 x Spacer M/F M2.5 x 11+6mm
  • 4 x Screw M2.5 x5mm

Document

X180 PCB Layout

FAQ

Add your comment
Geekworm Wiki welcomes all comments. If you do not want to be anonymous, register or log in. It is free.


Anonymous user #1

37 months ago
Score 0++
Can this be used with the X750 board as well? I currently have an X750 and an X708 connected to my RPi 4 for 12 cell 18650 power but would like to add more USB ports.

Anonymous user #2

33 months ago
Score 0++
Hi,It is not supported to be used with x750, because x750 is also installed under the Raspberry Pi. it can be used with x708 together.