Difference between revisions of "X1007"
| Line 8: | Line 8: | ||
==Features== | ==Features== | ||
| + | * Compatible With Raspberry Pi 5B | ||
| + | * Supports the connection of two 2.5-inch HDD/SSD to your Raspberry Pi 5 simultaneously | ||
| + | * Compliant with the Serial ATA 3.0 specification, with backward compatibility to SATA 2.0 and SATA 1.0 | ||
| + | * Adheres to the PCI-Express v2.0 specification and is backward compatible with PCI-Express v1.0 | ||
| + | * Supports communication speeds of 5.0 Gbit/s, 3.0 Gbit/s, and 1.5 Gbit/s | ||
| + | * Compatible with SATA 6G, 3G, and 1.5G hard drives | ||
| + | * Features plug-and-play installation for ease of setup | ||
| + | * LED indicators display power and drive status | ||
| + | * '''Powered from Raspberry Pi5 via pogo pins''', streamlining the power supply to a single source | ||
| + | * Compatible with the official active cooler without compromising cooling performance | ||
| + | * Supports the HAT+ STANDBY power state, automatically turning off SATA devices when the Pi 5 is powered down | ||
==Packing List== | ==Packing List== | ||
Revision as of 16:26, 13 March 2024
Contents
Overview
X1007 PCIe to 2 ports SATA HDD/SSD expansion board, designed to provide a mass-capacity storage and high-speed storage solution for your Raspberry Pi 5. This board facilitates the simultaneous connection of two 2.5-inch HDDs/SSDs, unleashing the full potential of your storage capabilities, with SATA 3.0 interface speeds reaching up to 5Gbps.
The X1007 connects to the underside of the Raspberry Pi 5, eliminating the need for a passthrough for the GPIO. This means you can use your favorite HATs while also utilizing this expansion board. Additionally, the X1007 and your HDDs can be powered from Raspberry Pi5 via pogo pins, streamlining the power supply to a single source.
The X1007 serves as the perfect storage solution for establishing a home media center or constructing a network-attached storage (NAS) system. It empowers you to store and stream your personal collection of videos, music, and digital photos within the confines of your home or remotely from anywhere around the globe..
Features
- Compatible With Raspberry Pi 5B
- Supports the connection of two 2.5-inch HDD/SSD to your Raspberry Pi 5 simultaneously
- Compliant with the Serial ATA 3.0 specification, with backward compatibility to SATA 2.0 and SATA 1.0
- Adheres to the PCI-Express v2.0 specification and is backward compatible with PCI-Express v1.0
- Supports communication speeds of 5.0 Gbit/s, 3.0 Gbit/s, and 1.5 Gbit/s
- Compatible with SATA 6G, 3G, and 1.5G hard drives
- Features plug-and-play installation for ease of setup
- LED indicators display power and drive status
- Powered from Raspberry Pi5 via pogo pins, streamlining the power supply to a single source
- Compatible with the official active cooler without compromising cooling performance
- Supports the HAT+ STANDBY power state, automatically turning off SATA devices when the Pi 5 is powered down
Enable comment auto-refresher