X1001
Overview
The X1001 V1.1 shield is an NVME M2 SSD adapter board for the Raspberry Pi 5 that uses the new PCIE interface of the Raspberry Pi 5 to utilise the NVME M2 SSDs for fast data transfers and ultra-fast booting.
Features
- Minimalist design, easy to install
- With XH2.54 5V power connector, just use it if you are using a ultra large capacity SSD if the current is not enough;
PS: Maximum current for pcie wire is 0.8-1A. if you find that the SSD is not working properly, it is possible that the power supply of SSD is not enough, then you need to check the current requirement of your SSD.
Enable comment auto-refresher
Anonymous user #19
Permalink |
Lisa
Anonymous user #18
Permalink |
Lisa
Anonymous user #17
Permalink |
Lisa
Anonymous user #16
Permalink |
Lisa
Anonymous user #15
Permalink |
Anonymous user #15
Anonymous user #14
Permalink |
Harry
Anonymous user #13
Permalink |
Lisa
Anonymous user #12
Permalink |
Lisa
Anonymous user #11
Permalink |
Anonymous user #10
Permalink |
Anonymous user #9
Permalink |
Anonymous user #9
Permalink |
Anonymous user #8
Permalink |
Lisa
Anonymous user #7
Permalink |
Anonymous user #6
Permalink |
Lisa
Anonymous user #5
Permalink |
Lisa
Anonymous user #4
Permalink |
Walker
Anonymous user #1
Permalink |
Anonymous user #6
Anonymous user #1
Permalink |
Nahumb
Permalink |
Anonymous user #3
Permalink |
Walker
Anonymous user #1
Permalink |
Anonymous user #2
Anonymous user #2
Walker