Difference between revisions of "X1001"
Line 15: | Line 15: | ||
==Test & Reviews== | ==Test & Reviews== | ||
− | By default the PCIe connector is not enabled. To enable it you should add the following option into <span class="tb_blue">/boot/firmware/config.txt</span> and reboot: | + | By default the PCIe connector is not enabled. To enable it you should add the following option into <span class="tb_blue">/boot/firmware/config.txt</span> and <span class="tb_blue">reboot</span>: |
# Enable the PCIe External connector. | # Enable the PCIe External connector. | ||
dtparam=pciex1 | dtparam=pciex1 |
Revision as of 12:07, 8 December 2023
X1001-V1.1-IMG-6879.jpg
Overview
The X1001 V1.1 shield is an NVME M2 SSD adapter board for the Raspberry Pi 5 that uses the new PCIE interface of the Raspberry Pi 5 to utilise the NVME M2 SSDs for fast data transfers and ultra-fast booting.
Features
- Minimalist design, easy to install
- With XH2.54 5V power connector, just use it if you are using a ultra large capacity SSD if the current is not enough;
PS:
Maximum current for pcie wire is 0.8-1A. If you find that the SSD is not working properly, it is possible that the power supply of SSD is not enough, then you need to check the current requirement of your SSD to decide whether power the SSD separately.
Test & Reviews
By default the PCIe connector is not enabled. To enable it you should add the following option into /boot/firmware/config.txt and reboot:
# Enable the PCIe External connector. dtparam=pciex1
A more memorable alias for pciex1 exists, so you can alternatively add dtparam=nvme to the /boot/firmware/config.txt file.
You also can refer to official documentatio:Enabling PCIe
Packing List
NOTE:
The M2*4 screw is to fix M2 SSD;
Enable comment auto-refresher
Anonymous user #19
Permalink |
Lisa
Anonymous user #18
Permalink |
Lisa
Anonymous user #17
Permalink |
Lisa
Anonymous user #16
Permalink |
Lisa
Anonymous user #15
Permalink |
Anonymous user #15
Anonymous user #14
Permalink |
Harry
Anonymous user #13
Permalink |
Lisa
Anonymous user #12
Permalink |
Lisa
Anonymous user #11
Permalink |
Anonymous user #10
Permalink |
Anonymous user #9
Permalink |
Anonymous user #9
Permalink |
Anonymous user #8
Permalink |
Lisa
Anonymous user #7
Permalink |
Anonymous user #6
Permalink |
Lisa
Anonymous user #5
Permalink |
Lisa
Anonymous user #4
Permalink |
Walker
Anonymous user #1
Permalink |
Anonymous user #6
Anonymous user #1
Permalink |
Nahumb
Permalink |
Anonymous user #3
Permalink |
Walker
Anonymous user #1
Permalink |
Anonymous user #2
Anonymous user #2
Walker