Raspberry Pi Zero Official Case

From Geekworm Wiki
Revision as of 16:29, 1 September 2018 by Admin (talk | contribs) (→‎Packing List)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Raspberry pi zero official case
Raspberry pi zero official case

Overview

The Raspberry Pi Zero Official Case has been designed to fit both the Pi Zero V1.3 and the Pi Zero W.

The case consists of two parts. It has a standard base featuring a cut-out to allow access to the GPIO, and a choice of three lids: a plain lid, a GPIO lid (allowing access to the GPIO from above), and a camera lid (which,

when used with the short camera cable supplied, allows the Raspberry Pi Camera or Camera Noir to be fitted neatly inside it)

Pi-zero-w800.jpg

Feature

  • 3 different cover board
  • Color: White & Red
  • Use For: Raspberry Pi Zero and Raspberry Pi Zero W
  • Camera Cable Length: 37mm

Packing List

  • 1 x Bottom Cover
  • 3 x Top Cover
  • 1 x Camera Cable(About 38 mm Length)
  • 4 x Rubber Feet
Add your comment
Geekworm Wiki welcomes all comments. If you do not want to be anonymous, register or log in. It is free.