8,941
edits
Changes
no edit summary
[[File:IMG-5626.jpg|thumb|right|Raspberry Pi model A+ (made in uk) (sku:366971)]]
{{GD Template Impl}}
[[File:IMG-5623.jpg|thumb|right|Raspberry Pi model A+ (made in uk) (sku:366971)]]
==Overview==
Raspberry pi model A+ (256M)
The Model A+ is the low-cost variant of the Raspberry Pi. It replaced the original Model A in November 2014. Compared to the Model A it has:
* More GPIO. The GPIO header has grown to 40 pins, while retaining the same pinout for the first 26 pins as the Model A and B.
* Micro SD. The old friction-fit SD card socket has been replaced with a much nicer push-push micro SD version.
* Lower power consumption. By replacing linear regulators with switching ones we’ve reduced power consumption by between 0.5W and 1W.
* Better audio. The audio circuit incorporates a dedicated low-noise power supply.
* Smaller, neater form factor. We’ve aligned the USB connector with the board edge, moved composite video onto the 3.5mm jack, and added four squarely-placed mounting holes. Model A+ is approximately 2cm shorter than the Model A.
We recommend the Model A+ for for embedded projects and projects which require very low power, and which do not require Ethernet or multiple USB ports.
[[Image:go.png]] [https://www.raspberrypi.org/products/model-a-plus/ official website]
[[Image:go.png]] [[Raspberry Pi Model A+ 512M]]
==Features==
* Silicon manufacturer: Broadcom
* Core architecture: ARM11
* Silicon-core: BCM2835
* Bits: 32-bit
* 700MHz, VideoCore, IV, Multimedia, Co-processor, 256MB RAM, 1 x HDMI, 1 x USB Port
== Document ==
[[Image:go.png]] [http://www.raspberrypi.org/documentation/hardware/raspberrypi/ documentation]
==Element version==
[[File:IMG-5679.jpg|800px]]
==RS version==
[[File:IMG-5627.jpg|800px]]
[[Category: Product Manual]]
[[Category: Raspberry pi]]
<comments/>