P173

From Geekworm Wiki
Jump to navigation Jump to search

Raspberry pi 4 aluminum case- Black Silver
P173
P173
P173
P173 Packing List

Overview

This raspberry pi 4 aluminum passive cooling case is specially designed for the Raspberry Pi 4 Model B, it compatibles with the latest Raspberry Pi 4 Model B.

[Wholesale]

Customised logo is available for bulk purchase, please contact us at info@geekworm.com;

Refer to RPi4-Cases to see more raspberry pi 4 case.

Features

  • Design with good heat dissipation
  • Passive cooling design, don't need to install the cooling fan or heatsink
  • Constructed out of high quality aluminum material
  • Suitable for raspberry pi 4 model b motherboard only
  • Easy installation and all hardware is included
  • Access to all ports of Raspberry Pi 4 Model B
  • GPIO cable interface is reservered, support to install the gpio cable
  • Easy to install and insert the micro sd card

Packing List

  • 1 x Aluminum Case for Raspberry Pi 4 Model B
  • 4 x Thermal tapes
  • 4 x Thermal tapes (only for backup)
  • 1 x L shape wrench

Note:

  1. The Raspberry Pi 4B motherboard is not included in the packing list.
  2. Please remove the transparent film before use thermal tapes

Document

P173 Installation Guide

Installation Video

https://youtu.be/dpAD2p7QC1w

Add your comment
Geekworm Wiki welcomes all comments. If you do not want to be anonymous, register or log in. It is free.


Anonymous user #19

3 months ago
Score 0++

Hello, can you please tell me the thickness of the Thermal Pad for the CPU ? I broke it and I need to replace it...

(unfortunately I bought the case on Amazon and they only gave 1 set of pads) Thank you!

Walker

3 months ago
Score 0++
Hi, it's about 1mm thick

Anonymous user #17

6 months ago
Score 0++
Which grease to use with copper plate?

Anonymous user #18

6 months ago
Score 0++
Is Arctic AC mx-4 ok for this?

Walker

6 months ago
Score 0++
Hello, we are using Japanese Shin-Etsu 7921 thermal grease. We have not tested other types of silicone grease.

Anonymous user #16

16 months ago
Score 0++
On this case the smallest heatsink post obstructs the access for the camera flat cable. Is it safe to cut this heatsink post out?

Lisa

16 months ago
Score 0++
Hi,You can cut it off if you want, but please be careful when using tools.

Anonymous user #15

24 months ago
Score 0++

First off: i have no rights to register? I had a heatsink and a fan. Running on 5V it had a temperature of about 47 °C. At 3.3V is was 53°C. Afters installing the P173 rhe temperature of the (quite busy) server was 52°C.

Nice!

Anonymous user #15

24 months ago
Score 0++

After two days of 53°C It now runs at 46°C, I have no idea why it cooled. The load is still 1.

but it's good to see that the P173 cools the same as a heatsink and fan.

Anonymous user #14

30 months ago
Score 0++

Just a small detail which might be interesting to others. With my model, the USB-C power plug sometimes gets direkt contact with the case. I have my Pi on a metal surface (Ikea PS1 cupboard). This sometimes resulted in the power supply not working properly (due to grounding?).

To solve this, I isolated the case edges around the USB-C plug with insulating tape. (Probably putting the case on a rubber/silicon base works just as well.)

Anonymous user #14

30 months ago
Score 0++
To clarify: the encased Pi sits on the metal cupboard. :)

Anonymous user #13

32 months ago
Score 0++
I've got this cute little case with a plate of copper for the cpu. But how can i attach this on the processor without slipping, when i close it?

Lisa

32 months ago
Score 0++
Hi,that copper sheet needs to be used together with silicone grease for better heat dissipation effect.

Anonymous user #12

32 months ago
Score 0++
Environement temp. 30°C, Raspberry temp 38°C. Pretty good! Iv'e used included copper plate and thermal grease.

Lisa

32 months ago
Score 0++
Hello,Thanks so much for your feedback, could you please tell us where you bought the P173?Best regards

Anonymous user #11

33 months ago
Score 0++

As of 23 June, 2021 Packing list : 1 x case 8 x thermal tape - 2 of each size 3 x long screws - fit gpio side of case 3 x short screws - fit power/hdmi/3.5mm side of case

1 x allen wrench

Anonymous user #10

33 months ago
Score 0++

Packaging list: 3x Thermal tapes No 2. pic: The 4pcs thermal tapes ....

HM???

Lisa

33 months ago
Score 0++
Hello,Thanks for your reminder, we have revised it to 4 x Thermal tapes;

Anonymous user #9

34 months ago
Score 0++

Running BOINC on my Raspberry Pi 4B 8GB:

Ambient 23°C Room: Measure Temps using command: vcgencmd measure_temp No case: ~75°C Case: ~62°C

Overall, it meets my objectives, a silent heat dissipating case.

Anonymous user #8

37 months ago
Score 0++

1. Recent packages come with 8 thermal tapes (2 of each type). Is this for redundancy / spare or shall they be "stacked" for better contact between components and heat pillars?

2. I Hope it´s clear for everybody to remove the transparent foil from the tape on both sides before installation ;-)

Anonymous user #7

38 months ago
Score 0++
Great product for anyone requiring passive cooling. One of the only passive cooling solutions with 4 point cooling pillars including the USB controller. USB controller gets hot on the pi4 so that is a major plus. Scalpel or sharp blade recommended for separating the plastic covers either side of the thermal pads. Well engineered case, fits really well. I would buy another

Anonymous user #6

38 months ago
Score 0++
Awesome product that keeps temperature way down! Easy to install and assemble! Your product rocks!!!

Anonymous user #5

40 months ago
Score 0++

I bought this package. This is not correct , I got 8 little thermal tapes instead of 3.

But you must put only one in each location (4)

Xiali

39 months ago
Score 0++
Hi dear ,the additional thermal tapes is gift(Backups) ,you can ignore them if you don't need them.By the way ,There are many Raspberry Pi fans exchange experiences on our official website, you are welcome to join us https://geek...munity/forum

Anonymous user #4

41 months ago
Score 0++
Sehr schönes Gehäuse; passt gut.

Xiali

41 months ago
Score 0++
Thanks

Anonymous user #3

41 months ago
Score 0++
wow. thats what i call an installation guide.... NOT

Cindy

41 months ago
Score 0++

Hi,

Sorry, the photos and installation guide updated now.

Anonymous user #2

41 months ago
Score 0++
Where are the instructions?

Cindy

41 months ago
Score 0++

Hi,

Really sorry, just updated.

Anonymous user #1

41 months ago
Score 0++
It would be nice to have the photos illustrating the installation available here - as well as on the Amazon site. All in all, I think that this is a very nice product, and I recommend it, especially for those who don't want to deal with fans.

Cindy

41 months ago
Score 0++

Hi, Sorry, the photos updated, also there is installation guide photo on the amazon product photos, please check, thanks! Best regard,

Cindy