Open main menu

Installation Guide For X850 V3.0 New Version

X850-v3.0-Installation-2.jpg

Add your comment
Geekworm Wiki welcomes all comments. If you do not want to be anonymous, register or log in. It is free.


Anonymous user #2

57 months ago
Score 0++

BTW, I used the following 120G SSD and it worked very well:

(Amazon) Dogfish Msata 120GB Internal Solid State Drive Mini Sata SSD Disk: https://www....F8&psc=1

Anonymous user #2

57 months ago
Score 0++
I would have expected that the manual would contain software instructions on how to format/configure the drive (mine originally showed up as /dev/sdb. I figured it out by Googling until I found this: https://thep...minal-window and https://gist...c80579872e5f

Anonymous user #1

58 months ago
Score 0++
I mounted mine this way but the WiFi was interfered with to the point I could not connect reliably. Way too much IF.

Admin

57 months ago
Score 0++

Hi,

Please bed close to the router if this happens, also which SSD do you use?

Anonymous user #3

43 months ago
Score 0++
I also had too much interference with wifi. Extending the unit away from the Pi with the cable helped but then I found a Crucial M500 at a thrift shop, got another interface cable, set it up for SSD boot on RPi3B+ and have not gotten around to putting this msata shield on another pi yet. Will use if for storage only. Dumb touch to have a USB 3.0 marketed for Raspberry Pi's that don't have usb 3.0 and it is not compatible with the RPi 4B.