Difference between revisions of "CM4 Stick"
Jump to navigation
Jump to search
Line 9: | Line 9: | ||
dtoverlay=dwc2,dr_mode=host | dtoverlay=dwc2,dr_mode=host | ||
==Features== | ==Features== | ||
+ | * 1 x Full-size HDMI 2.0 Interface | ||
+ | * 1x USB-A: OTG USB (used to upgrade and update Raspberry Pi Compute Module 4) | ||
+ | * 1x USB-AF: USB 2.0 High Speed socket, It is convenient for you to connect a keyboard or mouse. You can use a third-party USB-hub to expand more USB ports | ||
+ | * 1x USB-C: Type-C Power Port 5V/3A | ||
+ | * TF Card interface: MicroSD Card Slot (only supports CM4 module that without eMMC) | ||
+ | * 20Pin GPIO be reserved | ||
+ | * 1x fan interface: 4P-PH2.0 PWM Fan Control Interface | ||
+ | * 1 x CSI camera FPC connectors (22-pin 0.5mm pitch cable) | ||
+ | * 1x Reboot Button | ||
+ | * 1x Toggl Switch (for function selection of USB device and CM4 device) | ||
+ | * Working Temperature: 0℃~80℃ | ||
+ | * PCB Dimension: 70x45mm | ||
==Packing List== | ==Packing List== |
Revision as of 19:49, 7 July 2021
Contents
Overview
This CM4 Stick is an expansion board based on Raspberry Pi CM4. Provides a variety of expansion interfaces for the CM4 module, including upgrade interfaces, GPIO expansion, CSI, full size HDMI, TF card slot, USB 2.0, fan socket, etc.. With a small size, it is can be adapted to variety of applicantion.
When connected to the computer with USB-A OTG, it becomes a real USB flash drive.
The USB interface is disabled to save power by default on the CM4 . To enable it you need to add dtoverlay=dwc2,dr_mode=host to the config.txt file
dtoverlay=dwc2,dr_mode=host
Features
- 1 x Full-size HDMI 2.0 Interface
- 1x USB-A: OTG USB (used to upgrade and update Raspberry Pi Compute Module 4)
- 1x USB-AF: USB 2.0 High Speed socket, It is convenient for you to connect a keyboard or mouse. You can use a third-party USB-hub to expand more USB ports
- 1x USB-C: Type-C Power Port 5V/3A
- TF Card interface: MicroSD Card Slot (only supports CM4 module that without eMMC)
- 20Pin GPIO be reserved
- 1x fan interface: 4P-PH2.0 PWM Fan Control Interface
- 1 x CSI camera FPC connectors (22-pin 0.5mm pitch cable)
- 1x Reboot Button
- 1x Toggl Switch (for function selection of USB device and CM4 device)
- Working Temperature: 0℃~80℃
- PCB Dimension: 70x45mm
Packing List
User Manual
https://github.com/raspberrypi/documentation
Rpi-boot Windows installer or refer to CM4 emmc flashing
Enable comment auto-refresher
Anonymous user #2
Permalink |
Lisa
Anonymous user #1
Permalink |
Lisa