Revision as of 17:38, 8 December 2020 by Abby(talk | contribs)(Created page with "{{GD Template Impl}} ==Overview== ==Features== ==Packing List== ==User Manual== <!--Add review function! --> <comments /> <!--Please choose the --> <!--Remove other cat...")
This heat sink seems not to be suitable for raspberry CM4 modules, because it is not designed to cool all hot components! Namely, your heat sink has touch only to 2 of 4 components that can get very hot. The 2 not cooled ones will break within a short time with your heat sink!!!
1. The main heat is from CPU, and the heat dissipation of other components is very small, so it is not necessary to put a heat sink on all the components.
2. If the heat dissipation is not achieve, pls check whether the heatsink had touched CPU.
Due to production deviation, a few heatsink may have errors and need to use 2 heat sink pads. If you encounter this problem, please use 2pcs thermal pads and stack them on the CPU of the CM4 module.
3. Pls remember to remove the protective film.
4. It is recommended to consider using CPU grease if need better heat dissipation.
Hi,
The heatsink now equipped with 2pcs thermal pads. If you encounter this problem, please use 2pcs thermal pads and stack them on the CPU of the CM4 module. Pls remember to remove the protective film.
Did you get the thermal pads? Please contact the customer service of the corresponding website and the customer service will help you.
Enable comment auto-refresher
Anonymous user #3
Permalink |
Anonymous user #2
Permalink |
Abby
Anonymous user #1
Permalink |
Abby