9-Layer Case

From Geekworm Wiki
Revision as of 12:10, 11 October 2023 by Walker (talk | contribs) (→‎Overview)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
9-layer acrylic case for raspberry pi 4 model b
9-layer acrylic case for raspberry pi 4 model b
9-layer acrylic case for raspberry pi 4 model b
9-layer acrylic case for raspberry pi 4 model b

Overview

This is a 9 layers acrylic case designed specifically for the Raspberry Pi 4 Model B only, NOT for 3B+/3B;

It provides the best available protection/accessibility for the Raspberry Pi 4 Model B;

There is a GPIO open position with this case, easy to pull up and insert the GPIO pins, don't need to open the case.

Reserved ranked line hole for the camera, more convenient to use.

Cooling Fan specifications

  • Rated voltage: DC5V;
  • Working voltage :3.0~5 .8 V;
  • Current: 0.1A;
  • Air volume: 5 m3 / h;
  • Rpm: 13200RPM;
  • Noise: 18dB
  • cable length: 6cm

Installation Guide

9-layer acrylic case installation guide for raspberry pi 4 model b

Packing List

  • 1 x Acrylic Case
  • 1 x Cooling Fan

Note:

1. The raspberry pi 4 model B mother board is not included in the packing list.

2. When install the cooling fan, it not support to use heatsink since the height is not enough. The heat dissipation is good enough when only use the cooling fan.

Document

Add your comment
Geekworm Wiki welcomes all comments. If you do not want to be anonymous, register or log in. It is free.