3.5 inch TFT Capacitive Touch Screen
- This 3.5 inch TFT with Capacitive Screen is a display module can be applied to Raspberry pi ,it can be used as raspberry pi x window display terminals .
- It use the Raspberry pi high-speed SPI interface transfer Linux frame buffer data to the LCD module. The SPI clock can reach as high as63Mbps.
- The 3.5 LCD panel with this module have 16bit/pixel 320x480 high-resolution.
- This module equipped with high accuracy DS3231 hardware RTC unit make your Raspberry system time no longer depend on the network.
- The LCD Module can equip with resistive or capacitive touch screen. Two types of touch screen module can use the same software package.
- The LCD module used SPI, I2C and some GPIO signal from Raspberry pi 40PIN interface.
- Otherresource in 40PIN interface can be defined by users.
- The Module have the same size as Raspberry pi and can be directly plugged on the Raspberry pi.
- 16bit/pixel, 320x480 resolution and large view angle.
- with capacitive touch specifications, the software fully compatible.
- Providing preset raspbian-jessie system image and a separate installation package.
- Provide accurate DS3231 RTC unit to ensure that the system time is accurate.
- LCD Backlight can be controlled.
- Hardware and software is compatible with any version of the raspberry pi.
- It have the same size as standard raspberry pi.
- Reserved ID EEPROM location on board.
- The LCD modules used 28 pins out of raspberry pi 40 pin.
- When installing the module attention to align the first leg of the raspberry pi and LCD module.
Please refer to the User Manual in the Document.
User Manual: File:RPI-3.5-inch-User-Manual-EN.pdf