3.5 LCD D

From Geekworm
Revision as of 10:27, 31 October 2019 by Admin (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
3.5" LCD D for Pi 4 Only
3.5" LCD D for Pi 4 Only


This is a 60FPS 3.5 inch TFT Touch Screen with 480*320 physical resolution for raspberry pi 4 model B, the blacklight can be adjusted or be turned off. Please note it only compatible with Raspberry Pi 4 Model B, NOT compatible with other raspberry pi version.


Size: 3.5 inch

LCD Interface: DPI

Resolution: 480*320 (Pixel)

LCD Colors: 65K

Touch Screen Type: 4-wire resistive

Touch Screen Controller: XPT2046 SPI Interface

Refresh Rate: 60FPS

Backlight can be adjusted or be turned off;

Fan voltage and current: 5V 200ma

Packing List

1 x 3.5 inch TFT Touch Screen for raspberry pi 4 model b


1. The raspberry pi 4 model b is not including in the packing list.

2. The pin on the back of the LCD is not for customer to use, it is the interface for factory to programming and debugging.

Use Guide



1. How to check and confirm if the screen is not working?

  • To use this screen, first you need to add the screen driver into the config.txt. Please make sure you add it, thanks!
  • You can also use the command: sudo raspi-gpio get to have a check.
  • Please make sure the GPIO is set as DPI mode.
  • You can use the "mzp354hv05tr-retropie-install.sh" to test the screen, this is easy to test.

Add your comment
Geekworm welcomes all comments. If you do not want to be anonymous, register or log in. It is free.

Anonymous user #1

8 months ago
Score 0++

I fixed it, It looks like this script on the link you provide mzp354hv05tr-install-online.sh in line 4 as this is in it "cat > /boot/mzp351hv1tr.txt <<EOF" that is the wrong part LCD part!

I ran this mzp354hv05tr-install-offline.sh and now it works much better. Thanks for your prompt reply :)

Anonymous user #1

8 months ago
Score 0++
Dose not work on a Raspberry Pi 4, Getting strange distorted picture.


8 months ago
Score 0++

Hello friend, Please attach your order number or photo(video) details to contact us at support@geekworm.com . We will help you check and find out the problem. Best regards,