Temperature and Humidity Wifi Switch
This WIFI switch have 2 wide voltage input voltage, AC/DC 85V-220V and 7V~32V; output the switch signal to control your device , it can control the range of temperature and humidity, to achieve the automatic control of your home appliance,and monitoring the temperature and humidity.
- Input: AC/DC 85V-220V or 7V~32V;
- Constant temperature and humidity control
- Jog, self-locking dual mode
- Share function
- Timing function
- Time delay function
- Phone APP automatic or manual mode control
- Phone APP automatic mode: controll by setting the maximum temperature and minimum temperature
PS: what's Jog mode?
what's self0locking mode?
Or please scan the QRCode with your mobile phone
- Electric Fireplace
- electric heater
- carbon crystal heating
- electric warming fan
- electrical oil heater
- greenhouse etc.
This is APP control interface for you to set Auto mode or Manual mode.
Enter this interface you can set the temperature and humidity.
Lower than 22℃ Button grey means when temperature is lower than 22℃, the switch controller will stop working.
Higher than 26℃ Button blue means when temperature is higher than 26℃, the switch controller will start working.
The humidity control is the same principle as above.
You can comtrol the temperature and humidity as you wish, very convenient.
Enter this interface you can control the Power on Switch State, usually we keep it "OFF".
Temperature and Humidity Sensor Specifications
- Measurement range:
- Temperature: -40 - +80℃
- Humidity: 0 - 99.9%RH
- Accuracy(in 25℃):
- Temperature: ±0.5℃
- Humidity: ±3%RH (10...90%RH)
- Temperature: resistive transducer
- Humidity: capacitive transducer
- Working temperature range: -40 - +80℃
- Plower supply: DC 3.1V-5.5V
- Output: digital (1 wire)
- Case material: ABS
- Weight: 14g