RPI HIFI AMP

From Geekworm
Jump to navigation Jump to search


RPI HIFI AMP Board
RPI HIFI AMP Board
RPI HIFI AMP Board
raspberry pi amp case

Introduction

RPI-HIFI-AMP module is a high-quality, highly efficient 25W Class-D power amplifier for the Raspberry Pi. you can get a stereo audio system by mount it onto your Raspberry Pi. Only thing you have to do is connect your loudspeakers to our module. It’s the ideal choice for small room audio system.

Features

  • Up to 25W output power.
  • Capable of driving 4 Ohm speakers or higher.
  • Fully controllable from the Raspberry Pi.
  • Support 44.1kHz and 48kHz sample rates.
  • Digital-analog conversion included—no need for external DACs or sound cards.
  • Fully digital sound path for optimal audio performance.
  • Connects directly to the Raspberry Pi no additional cables needed.
  • Wide Power input :12-20v external power input for both RPI and module.
  • HAT size.
  • Up to 90% Efficient.
  • Integrated EEPROM for automatic configuration (Option).

Hardware connection

  • Connect the RPI-HIFI-AMP module and RPI with 40 pin connector .While installing the module
  • attention to align the first leg of the raspberry pi and RPI-HIFI-AMP module.

Software Installation

RPI-HIFI-AMP module compatible with many Raspberry pi music playback system such as:

OSMC / Max2Play / RuneAudio / Volumio / Moode / PiCorePlayer / PiMusicBox / OpenELEC etc. The

user can choose a suitable for their own .

Match Power Supply

Please refer to DC 19V 2A Power Supply

Warning: The Raspberry pi will be powered by the AMP. It is not allowed to connect 5V to the Micro-USB port of the raspberry pi. Power supply is only one external 12-20V power supply that will be connected directly to the AMP.

Raspberry pi AMP.png

Download

Packing List

  • 1 x HIFI AMP board for Raspberry pi

FAQ

1.How to set up the Volumio( Based on Volumio: 2.444 version)? Please refer to the picture: Hifi-amp-Volumio-setup-01.jpg

Hifi-amp-Volumio-setup-02.jpg

Customer feeback: Work on Volumio: 2.413 version

Add your comment
Geekworm welcomes all comments. If you do not want to be anonymous, register or log in. It is free.


Anonymous user #6

one month ago
Score 0++
4 Ohm speaker OK ??

Cindy

one month ago
Score 0++
Hi, yes, ok.Capable of driving 4 Ohm speakers or higher.

Anonymous user #5

one month ago
Score 0++
The 19v power supply is to weak for the rapsberry pi3. Is it possible to use a 19v powersupply for laptop with 4.65 A ?

Cindy

one month ago
Score 0++

Hi friend,

Yes, 12-20V power supply is ok to use.

Anonymous user #4

3 months ago
Score 0++
So really no GPIO can be used for other purposes, for example an on/off button?

Anonymous user #2

6 months ago
Score 0++

Please can you explain: what are the 3 holes for contacts in the right top corner of PCB? Seems to be for rotary volume control, that would be fine. In software you can accidentally increase the power and (accidentally) missing access to volume control over application, so the best would be physical control... Thanks

Michal

Anonymous user #3

4 months ago
Score 0++
Seems to be for an ir receiver.

Anonymous user #1

14 months ago
Score 0++
Which GPIO pins does it use?

Admin

14 months ago
Score 0++

Hello friend, When install the AMP board on the Raspberry Pi, it will take the full GPIO PIN of your raspberry pi board. Hope to get your understanding! Best regards,

Geekworm